Deformation Characterisations for the WEDM Contour Cut Surfaces

Naveed, Nida (2017) Deformation Characterisations for the WEDM Contour Cut Surfaces. International Journal of Robotics and Mechatronics, 4 (1). pp. 22-32. ISSN 2288-5889

[img]
Preview
PDF (Deformation Characterisations for the WEDM Contour Cut Surfaces)
Deformation Characterisations for the WEDM Contour Cut Surfaces.pdf - Accepted Version

Download (1MB) | Preview

Abstract

The contour method is a destructive technique to measure the residual stresses. The contour method involves cutting a specimen into two halves and provides a full cross-sectional map of the residual stress acting normal to the cut surface. The cutting process is the first and most important step of the method. Any error in this step can adversely affect all the subsequent steps of the method. Wire Electric Discharge Machining (WEDM) is the best choice cutting process for the contour method. Any deviation can cause inaccuracy and uncertainty in the contour stress results. Therefore, the most appropriate cutting conditions must be selected in order to minimise undesirable cutting effects and to obtain the best surface finish. This research covers the design of a test specimen to benchmark the quality of cutting for contour method measurement. The design allows sequential trial cuts on a nominally stress-free specimen. A high yield strength mild steel (EN3B) has been selected for this research on the basis that it is widely used in industrial applications. This research helps to identify the extent, nature and causes of undesirable effects of cutting process and aids to identify the important parameters that can be used to demonstrate the quality of the contour cut to help optimise the cutting process.

Item Type: Article
Subjects: Engineering > Mechanical Engineering
Divisions: Faculty of Engineering and Advanced Manufacturing
Depositing User: Nida Naveed
Date Deposited: 16 Mar 2018 11:14
Last Modified: 17 Mar 2018 07:34
URI: http://sure.sunderland.ac.uk/id/eprint/8899

Actions (login required)

View Item View Item

Downloads

Downloads per month over past year