SURE

Article

Armstrong, Mark, Mehrabi, Hamid, Naveed, Nida and Gregg, Carl (2023) Evaluating energy consumption in atomic diffusion additive manufacturing versus sand casting. Journal of Engineering and Technological Advances (JETA), 8 (1). pp. 46-65. ISSN 2811-4280

Armstrong, Mark, Hamid, Mehrabi and Naveed, Nida (2022) An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes, 84. pp. 1001-1029. ISSN 1526-6125

Oladapo, Bankole, Kayode, Joseph, Karagiannidis, Panagiotis, Naveed, Nida, Mehrabi, Hamid and Ogundipe, Kolawole (2022) Polymeric composites of cubic-octahedron and gyroid lattice for biomimetic dental implants. Materials Chemistry and Physics, 289. ISSN 0254-0584

Wu, Haishang, Mehrabi, Hamid, Naveed, Nida and Karagiannidis, Panagiotis (2022) Impact of strategic control and supply chain management on recycled plastic additive manufacturing. Journal of Cleaner Production, 364. ISSN 0959-6526

Haishang, Wu, Mehrabi, Hamid, Naveed, Nida and Karagiannidis, Panagiotis (2022) A Business Model for Additive Manufacturing of Recycled Plastics towards Sustainability. The International Journal of Advanced Manufacturing Technology. ISSN 1433-3015

Atkinson, Callum, Naveed, Nida, Haq, Mir Irfan Ul and Ahmad Mehrabi, Hamid (2022) High Cyclic Fatigue Behaviour of Varied Pitch Compression Springs for Automotive Applications. Journal of Robotics and Mechanical Engineering, 1 (1). ISSN 2770-4122

Rajabi, Armin, Hodgson, Peter, Ghazali, Mariyam J., Sajuri, Zainuddin, Almaslow, Alireza, Mehrabi, Hamid and Baghdadi, Amir Hossein (2022) Challenges and solutions in the synthesis of nano-TiCN: A review. Ceramics International. ISSN 0272-8842

Wu, Haishang, Mehrabi, Hamid, Karagiannidis, Panagiotis and Naveed, Nida (2021) Additive manufacturing of recycled plastics: Strategies towards a more sustainable future. Journal of Cleaner Production, 335. p. 130236. ISSN 0959-6526

Hassani, Vahid, Mehrabi, Hamid, Gregg, Carl, O'Brien, Roger William, Ituarte, Inigo Flores and Tjahjowidodo, Tegoeh (2021) Multi-Material Composition Optimization vs Software-Based Single-Material Topology Optimization of a Rectangular Sample under Flexural Load for Fused Deposition Modeling Process. Materials Science Forum, 1042. pp. 23-44. ISSN 1662-9752

A. Mehrabi, Hamid and Usher, Peter (2020) Energy Audit and Cost Saving in an Aluminum Sand Casting Foundry. Journal of Environmental Friendly Materials, 4 (2). pp. 47-51.

Ibrahim, Zunaidi, ONeill, Mike, Hassani, Vahid and Ahmad Mehrabi, Hamid (2020) Comparing the Efficiency of Intelligent Hybrid Operator Assistance Software with Intuitive Set-up (OASIS) for Assembly Production Line. Journal of Physics: Conference Series, 1529 (042106). pp. 1-12. ISSN 1742-6588

Hassani, Vahid, Morris, Adrian, Ibrahim, Zunaidi, Abubakar, Ismail, Ahmad Mehrabi, Hamid and O'Brien, Roger (2020) A Mathematical Model for A Cladding Fastener to Estimate the Maximum Pull-Out Force Capacity. Journal of Physics: Conference Series, 1529 (052053). pp. 1-8. ISSN 1742-6588

Hassani, Vahid, Khabazi, Zubin, Ahmad Mehrabi, Hamid, Gregg, Carl and O'Brien, Roger (2020) Rationalization Algorithm for a Topologically-Optimized Multi-Branch Node for Manufacturing by Metal Printing. Building Engineering, 29. ISSN 2352-7102

Hassani, Vahid, Morris, Adrian, Zunaidi, Ibrahim, Hamid, Mehrabi, Roger, O'Brien and Ismail, Abubakar (2019) A Mathematical Model for A Cladding Fastener to Estimate the Maximum Pull-Out Force Capacity. Journal of Physics: conference series 1529, 1529. pp. 1-8.

salemi. G, Ali and Ahmad Mehrabi, Hamid (2016) Synthesis and characterization of silica mesoporous material produced by hydrothermal continues pH adjusting path way. Materials International, 26 (4). pp. 411-414. ISSN 1002-0071

Salonitis, Konstantinos, Jolly, Mark R., Zeng, Binxu and Ahmad Mehrabi, Hamid (2016) Improvements in energy consumption and environmental impact by novel single shot melting process for casting. Journal of Cleaner Production, 137. pp. 1532-1542. ISSN 0959-6526

Mehrabi, Hamid, Salonitis, Konstantinos and Jolly, Mark (2016) The challenges for energy efficient casting processes. Procedia CIRP, 40. pp. 24-29. ISSN 2212-8271

Pourahmad, P, Abbasi, Mehrdad and Ahmad Mehrabi, Hamid (2012) Bimetal friction stir welding of aluminum to magnesium. Journal of Advanced Materials and Processing, 1 (1).

Mehrabi, Hamid and Bowman, Jeremy (1997) Electrofusion Welding of Cross-Linked Polyethylene Pipes. Iranian Polymer Journal, 6 (3). pp. 195-203. ISSN 1026-1265

Ahmad Mehrabi, Hamid and Mintz, Barry (1997) Influence of tempering on impact behaviour of quenched and tempered steels with low hardenability. Materials Science and Technology, 13 (12). pp. 997-1006. ISSN 12

Book Section

Armstrong, Mark, Hamid, Mehrabi and Naveed, Nida (2023) Environmental Impact of Metal Additive Manufacturing. In: 3D Printing and Sustainable Product Development. CRC Press, Taylor and Francis, Boca Raton, pp. 61-86. ISBN 9781003306238

Wu, Haishang, Naveed, Nida and Hamid, Mehrabi (2023) How 3D-Printing achieves Sustainability. In: 3D-Printing and Sustainable Product Development. CRC Press, Taylor and Francis, pp. 21-37. ISBN 9781003306238

Jolly, Mark, Salonitis, Konstantinos and Hamid, Mehrabi (2017) Energy Efficiency Status-Quo at UK Foundries: The “Small-Is-Beautiful” Project. In: Light Metals 2017. Springer. ISBN 9783319515410

Mehrabi, Hamid, Jolly, Mark and Salonitis, Konstantinos (2016) Road-Mapping towards a Sustainable Lower Energy Foundry. In: Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies (52). Springer. ISBN 9783319320960

Conference or Workshop Item

Naveed, Nida (2023) Optimising Fused Deposition Modelling (FDM) Parameters for Enhanced Mechanical Properties of 3D Printed Parts. In: The 8th European Congress on 3D Printing and Additive Manufacturing, 02-03 Oct 2023, Amsterdam, Netherlands.

Armstrong, Mark, Mehrabi, Hamid, Naveed, Nida and Gregg, Carl (2022) Comparison Analysis of Energy Consumption of Atomic Diffusion Additive Manufacturing with Sand Casting: Towards a more Sustainable Future. In: International Conference on Sustainable Engineering & Advanced Technology (ICSEAT2022), 16 17 June 2022, SEGi University.

Haishang, Wu, Mehrabi, Hamid, Karagiannidis, Panagiotis and Naveed, Nida (2022) Sustainable Manufacturing by Home Based 3D Printing. In: International Conference on Sustainable Engineering & Advanced Technology (ICSEAT2022), 16 17 June 2022, SEGi University.

Mehrabi, Hamid, Salonitis, Konstantinos and Jolly, Mark (2016) Sustainable Investment Casting. In: 14th WORLD CONFERENCE IN INVESTMENT CASTING, 17-20 April 2016, Paris, France.