SURE

Rehman, Sheikh, Akram, Sufyan, Kanellopoulos, Antonios, Elmarakbi, Ahmed and Karagiannidis, Panagiotis (2020) Development of new graphene/epoxy nanocomposites and study of cure kinetics, thermal and mechanical properties. Thermochimica Acta. ISSN 0040-6031

Gomez, Julio, Villaro, Elvira, Karagiannidis, Panagiotis and Elmarakbi, Ahmed (2020) Effects of chemical structure and morphology of graphene-related materials (GRMs) on melt processing and properties of GRM/polyamide-6 nanocomposites. Results in Materials, 7. p. 100105. ISSN 2590-048X

Elmarakbi, Ahmed, Karagiannidis, Panagiotis, Ciappa, Alessandra, Innocente, Franco, Galise, Francesco, Martorana, Brunetto, Bertocchi, Francesco, Cristiano, Francesco, Villaro Ábalos, Elvira and Gómez, Julio (2019) 3-Phase Hierarchical Graphene-based Epoxy Nanocomposite Laminates for Automotive Applications. Journal of Materials Science & Technology, 35 (10). pp. 2169-2177. ISSN 1005-0302

Azoti, Wiyao, Elmarakbi, Ahmed, El-Hage, Hisham and Elkady, Mustafa (2018) Elasto-plastic response of graphene nanoplatelets reinforced polymer composite materials. International Journal of Automotive Composites, 3 (2/3/4). pp. 226-236. ISSN 2051-8218

Elmarakbi, Ahmed and Azoti, Wiyao (2018) Mechanical prediction of graphene-based polymer nanocomposites for energy-efficient and safe vehicles. In: Experimental characterization, predictive mechanical and thermal modeling of nanostructures and their polymer composites. Micro and Nano Technologies . Elsevier, pp. 159-177. ISBN 978-0-323-48061-1

Elmarakbi, Ahmed and Azoti, Wiyao (2018) State of the Art of Graphene Lightweighting Nanocomposites for Automotive Applications. In: Experimental characterization, predictive mechanical and thermal modeling of nanostructures and their polymer composites. Micro and Nano Technologies . Elsevier, pp. 1-23. ISBN 978-0-323-48061-1

Sheikh, Muhammad, Elmarakbi, Ahmed and Elkady, M (2017) Thermal Runaway Detection of Cylindrical 18650 Lithium-ion Battery under Quasi-Static Loading Conditions. Journal of Power Sources, 370. pp. 61-70. ISSN 0378-7753

Selim, M S, Shenashen, M A, Fathalla, N A, Elmarakbi, Ahmed and El-Safty, Sherif (2017) In Situ Fabrication of One‐Dimensional‐Based Lotus‐Like Silicone/ϒ–Al2O3 Nanocomposites for Marine Fouling Release Coatings. Chemistry Select, 24 (30). pp. 9691-9700. ISSN 9691-9700

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Multiscale modelling of graphene platelets-based nanocomposite materials. Composite Structures, 168. pp. 313-321. ISSN 0263-8223

Sheikh, Muhammad, Elmarakbi, Ahmed and Rehman, Sheikh (2017) Thermal and Electrical failure analysis of lithium-ion battery after crash. In: 2nd International Electrical Engineering Conference (IEEC 2017), 19 - 20 May 2017, IEP Centre, Karachi, Pakistan.

Selim, Mohamed S., Shenashen, Mohamed A., Elmarakbi, Ahmed, Fatthallah, Nesreen A., Hasegawa, Shin-ichi and El-Safty, Sherif (2017) Synthesis of ultrahydrophobic and thermally stable inorganic–organic nanocomposites for self-cleaning foul release coatings. Chemical Engineering Journal, 320. pp. 653-666. ISSN 1385-8947

Elmarakbi, Ahmed, Azoti, Wiyao and Serry, Mohamed (2017) Multiscale modelling of hybrid glass fibres reinforced graphene platelets polyamide PA6 matrix composites for crashworthiness applications. Applied Materials Today, 6. ISSN 2352-9407

Selim, M.S, Shenashen, M.A, El-Safty, Sherif, Higazy, S.A, Selim, M.M, Isago, H and Elmarakbi, Ahmed (2017) Recent progress in marine foul-release polymeric nanocomposite coatings. Progress in Materials Science, 87. pp. 1-32. ISSN 0079-6425

Elmarakbi, Ahmed, El-Safty, Sherif, Martorana, B and Azoti, Wiyao (2017) Nanocomposites for Automotive: Enhanced Graphene-based Polyer Materials and Multi-Scale Approach. International Journal of Automotive Composites, 2 (2). pp. 155-166. ISSN 2051-8218

Elkady, Mustafa, Elmarakbi, Ahmed, MacIntyre, John and Al-Hariri, Mohammad (2017) Collision mitigation and vehicle transportation safety using integrated vehicle dynamics control systems. Journal of Traffic and Transportation Engineering (English Edition), 4 (1). pp. 41-60. ISSN 2095-7564

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Constitutive modelling of ductile damage matrix reinforced by platelets-like particles with imperfect interfaces: Application to graphene polymer nanocomposite materials. Composites Part B: Engineering. ISSN 1359-8368

Shenashen, Mohamed A., Hassen, Diab, El-Safty, Sherif, Selim, Mahmoud M., Akhtar, Naeem, Chatterjee, Abhijit and Elmarakbi, Ahmed (2016) Mesoscopic Fabric Sheet Racks and Blocks as Catalysts with Efficiently Exposed Surfaces for Methanol and Ethanol Electrooxidation. Advanced Materials Interfaces, 3 (24). p. 1600743. ISSN 2196-7350

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Micromechanics Modelling of Graphene Platelets Reinforced Polymer Composite Materials With Imperfect Interfaces. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA.

Hassen, D., Shenashen, M.A., El-Safty, Sherif, Selim, M.M., Isago, H., Elmarakbi, Ahmed, El-Safty, A. and Yamaguchi, H. (2016) Nitrogen-doped carbon-embedded TiO 2 nanofibers as promising oxygen reduction reaction electrocatalysts. Journal of Power Sources, 330. pp. 292-303. ISSN 0378-7753

Khaled, M., Hachem, F., El Hage, H., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2016) Experimental Study of the Flow Induced by a Vehicle Fan and the Effect of Engine Blockage in a Simplified Model. International Journal of Automotive Technology, 17 (4). pp. 617-627. ISSN 1229-9138

Azoti, Wiyao, Elmarakbi, Ahmed, El-Hage, H. and Elkady, M. (2016) Hierarchical modelling of carbon fibers graphene reinforced polymer composites materials. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal. (Unpublished)

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Multi scale modelling of graphene platelets reinforced polymer matrix composite materials. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal. (Unpublished)

Elmarakbi, Ahmed and Basso, M. (2016) Multiscale Analysis of the Mechanical Performance improvements of composites CFRP laminates, and composites with short glass fibers, through the addition of Nanoplatelets of Graphene. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal.

Sheikh, Muhammad, Elmarakbi, Ahmed, David, B. and Michael, M. (2016) Heat Generation Estimation in Electric Vehicle Battery under Mechanical Load Condition. In: FISITA 2016 World Automotive Congress, 26-30 Sep 2016, Busan, South Korea. (Unpublished)

Elkady, M., Elmarakbi, Ahmed and MacIntyre, John (2016) Integrated Active and Semi-Active Suspension Control System Vehicle Collision Alleviation. In: FISITA 2016 World Automotive Congress, 26-30 Sep 2016, Busan, South Korea. (Unpublished)

Xie, C, Elmarakbi, Ahmed, Yongkuo, L and Jizhou, Z (2016) A Dynamic Ordered Concept Lattice Based Algorithm for Early Diagnosis of NPP Faults. Progress in Nuclear Energy, 92. pp. 22-28. ISSN 0149-1970

Elmarakbi, Ahmed and Azoti, Wiyao (2016) Crashworthiness modelling of hierarchical short glass fibres reinforced graphene polymer composites materials. In: ICILSM2016, 22-26 May 2016, Turin, Italy.

Hassen, Diab, El-Safty, Sherif, Tsuchiya, Koichi, Chatterjee, Abhijit, Elmarakbi, Ahmed, Shenashen, Mohamed. A. and Sakai, Masaru (2016) Longitudinal Hierarchy Co3O4 Mesocrystals with High-dense Exposure Facets and Anisotropic Interfaces for Direct-Ethanol Fuel Cells. Scientific Reports, 6 (1). ISSN 2045-2322

Serry, M., Abdel-Nasser, S., Sakr, M. and Elmarakbi, Ahmed (2016) Nanostructured Conducting Polymer-Graphene Composite for Energy Conversion Applications. In: 2nd International Conference on Advanced Functional Materials (AFM2016), 8-11 Aug 2016, Jeju, South Korea. (Unpublished)

Elkady, M., Elmarakbi, Ahmed, MacIntyre, John and Alhariri, M. (2016) Multi-body Integrated Vehicle-Occupant Models for Collision Mitigation and Vehicle Safety using Dynamics Control Systems. International Journal of System Dynamics Applications, 5 (2). pp. 81-125. ISSN 2160-9772

Elkady, M. and Elmarakbi, Ahmed (2016) Using an Extendable Bumper With an Aid of Vehicle Dynamics Control System to Improve the Occupant Safety in Frontal Vehicle-to-Vehicle Collision Scenario. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA.

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Constitutive Modelling of Graphene Platelets Reinforced Polymer Composite Materials with Imperfect Interfaces. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA. (Unpublished)

Elmarakbi, Ahmed, Jianhua, Wang and Azoti, Wiyao (2016) Nonlinear Elastic Moduli of Graphene Sheet-Reinforced Polymer Composites for Automotive Applications. International Journal of Solids and Structures, 81 (1). pp. 383-392. ISSN 0020-7683

Elmarakbi, Ahmed (2016) Innovative Graphene-based Polymer Composites for Automotive Applications. In: Annual Automotive Interior Design Summit, 14 Mar 2016, Stuttgart, Germany. (Unpublished)

Elmarakbi, Ahmed (2015) Material Concepts and Challenges for Vehicle Lightweighting: Modelling of Graphene-based Polymer Composites. In: 2nd Mechanics of Composites (MECHCOMP2016), 11-14 Jul 2016, Porto, Portugal. (Unpublished)

Elmarakbi, Ahmed (2015) Enhanced Graphene Nanocomposites Materials for vehicle structures. In: National Institute for Material Sciences (NIMS), 15-17 Feb 2017, Tokyo Big Sight, Japan. (Unpublished)

Elkady, M, Elmarakbi, Ahmed and MacIntyre, John (2015) Integration of Vehicle Dynamics Control Systems with an Extendable Bumper for Collision Mitigation. International Journal of Automotive and Mechanical Engineering, 12. pp. 2893-2913. ISSN 2229-8649

Sheikh, M, Baglee, David, Knowles, Michael, Elmarakbi, Ahmed and Al-Hariri, Mohammad (2015) A Novel Approach for Predicting Thermal Runaway in Electric Vehicle Batteries when Involved in a Collision. In: ASME 2015 International Mechanical Engineering Congress and Exposition, 13-19 Nov 2015, Houston, Texas, USA.

Martorana, B., Elmarakbi, Ahmed, Veca, A., Fondacaro, D. and Lambertini, V. (2015) Graphene-based Materials: Opportunities for Multifunctional Lightweight Structures in Automotive Sector. In: NanotechITALY 2015, 25-27 Nov 2015, Bologna, Italy.

Elmarakbi, Ahmed (2015) Hierarchical Graphene Composites for Automotive. In: 2nd Graphene World Summit 2015, 4-6 Nov 2015, Barcelona, Spain. (Unpublished)

Mollon, V., Bonhomme, Jorge, Elmarakbi, Ahmed, Vina, J. and Arguelles, A. (2015) Comparison of numerical, empirical and local partition methods in ADCB specimens. International Journal of Automotive Composites, 1 (4). pp. 299-312. ISSN 2051-8218

Elmarakbi, Ahmed and Martorana, B (2015) Graphene-based Composite Materials for Automotives. In: 20th International Conference on Composite Materials, ICCM20, 19-24 Jul 2015, Copenhagen, Denmark.

Ahmed, D., El-Safty, Sherif, Khalil, K., Dewidar, M., Abdelsalam, M. and Elmarakbi, Ahmed (2015) Nitrogen-Doped Titanium/Carbon Nanofibers Mats as Promising Oxygen Reduction Reaction Electrocatalysts in Acidic Media. In: Nanomaterials: Application & Properties 2015, 16-23 Sep 2015, Lviv, Ukraine. (Unpublished)

Elkady, M and Elmarakbi, Ahmed (2015) Enhancement of Occupant Safety in Offset Frontal Vehicle Collision: Using Novel Mathematical Modelling Alongside Vehicle Dynamics Control Systems. In: 24th International Technical Conference on the Enhanced Safety of Vehicles (ESV2015), 8-11 June 2015, Gothenburg, Sweden.

Khaled, M, Ramadan, M and Elmarakbi, Ahmed (2015) Analytical Determination of Louvered-Fin Heat Exchanger Thermal Performance in Relation with the Air Flow Statistics. In: 6th International Symposium on Advances in Computational Heat Transfer, CHT-15, 25-29 May 2015, Piscataway, USA.

O'Brien, Roger, Veldsman, W and Elmarakbi, Ahmed (2015) The development of a robotic Low Stress No Distortion (LSND) welding system suitable for achieving real world applications with practical examples. In: 18th International Conference on Joining Materials, 26-29 Apr 2015, Helsingor, Denmark.

Khaled, M., Gad ElRab, M., Habchi, C., Al Shaer, A., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2015) Analysis and Modeling of the Thermal Soak Phase of a Vehicle – Temperature and Heat Flux Measurements. International Journal of Automotive Technology, 16 (2). pp. 221-229. ISSN 1470-9511

Elmarakbi, Ahmed (2015) Novel Composite Materials for Automotive Applications: Concepts and Challenges for Energy-Efficient and Safe Vehicles. In: 10th International Conference on Composites Science and Technology, ICCST/10, 2-4 September 2015, Lisbon, Portugal.

Elmarakbi, Ahmed and Azoti, Wiyao (2015) Novel composite materials for automotive applications: concepts and challenges for energy-efficient and safe vehicles. In: 10th International Conference on Composite Science and Technology, ICCST/10, 2-4 Sep 2015, Instituto Superior Tecnico, Lisboa, Portugal.

Khaled, M, Ramadan, M, Elmarakbi, Ahmed and Fourment, L (2015) Simulation of Incremental Forming Processes Using a Thermo-Mechanical Partitioned Algorithm. Key Engineering Materials, 651. pp. 1331-1336. ISSN 1013-9826

O'Brien, Roger, Veldsman, W and Elmarakbi, Ahmed (2015) The development of an industrial robotic Low Stress No Distortion (LSND) welding system. In: 68th IIW Annual Assembly & International Conference, 28 Jun - 3 Jul 2015, Helsinki, Finland.

Khaled, Mahmoud, Ramadan, Mohamad, El-Hage, Hicham, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Review of underhood aerothermal management: Towards vehicle simplified models. Applied Thermal Engineering, 73 (1). pp. 842-858. ISSN 1359-4311

Elkady, M. and Elmarakbi, Ahmed (2014) Enhancement Of Occupant Safety During Frontal Collisions using New Vehicle/Occupant Interaction Modelling with VDC Systems and Smart Structures. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 14 - 20 Nov 2014, Montreal, Canada.

Habchi, Charbel, Lemenand, Thierry, Della Valle, Dominique, Khaled, Mahmoud, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Mixing assessment by chemical probe. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1411-1420. ISSN 1226-086X

Khaled, M, Ramadan, M, Elmarakbi, Ahmed, Harambat, F and Peerhossaini, H (2014) The Underhood Aerothermal Management of Leakage Zones - Temperature Measurements. WIT Transactions on Engineering Sciences, 83. pp. 303-311. ISSN 1746-4471

Khaled, M., Ramadan, M., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2014) Underhood Aerothermal Management of Leakage Zones – Temperature Measurements. In: 13th International Conference on Simulation and Experiments in Heat Transfer and its Applications, 2-4 Jul 2014, A Coruña, Spain.

Elkady, M., Elmarakbi, Ahmed and MacIntyre, John (2014) Improvement of Vehicle Safety by using Vehicle Dynamics Control Systems Alongside an Extendable Bumper: A New Mathematical Methodology. In: FISITA 2014 World Congress, 2-6 Jun 2015, Masstricht, The Netherlands.

Khaled, Mahmoud, Habchi, Charbel, Harambat, Fabien, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Leakage effects in car underhood aerothermal management: temperature and heat flux analysis. Heat and Mass Transfer, 50 (10). pp. 1455-1464. ISSN 0947-7411

O'Brien, Roger, Veldsman, W. and Elmarakbi, Ahmed (2014) The Development of an Industrial Robotic Low Stress No Distortion (LSND) Welding System. In: International Institute of Welding – International Congress (IIW-IC-2014), 9-11 Apr 2014, New Delhi, India.

Khaled, Mahmoud, Al-Shaer, A., Ramadan, Mohamad, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Sensitivity and applications of a new method for the simultaneous measurement of convective and radiative heat flux in underhood applications—toward multiple versions. Measurement Science and Technology, 25 (3). pp. 1-12. ISSN 0957-0233

Elmarakbi, Ahmed (2013) Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. Wiley. ISBN 978-1-118-42386-8

Habchi, C, Harion, J, Russeil, S, Bougeard, D, Hachem, F and Elmarakbi, Ahmed (2013) Chaotic Mixing By Longitudinal Vorticity. Chemical Engineering Science, 104. pp. 439-450. ISSN 0009-2509

Hu, N and Elmarakbi, Ahmed (2013) Damage propagation in FRP laminates structures under transverse quasi- static and low-velocity impact loadings. In: Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. Wiley, pp. 257-292. ISBN 978-1-118-42386-8

Elmarakbi, Ahmed, Rengaraj, Chandrasekaran, Wheatley, Alan and Elkady, M (2013) New integrated chassis control systems for vehicle handling performance enhancement. International Journal of Dynamics and Control, 1 (4). pp. 360-384. ISSN 2195-2698

Elmarakbi, Ahmed, Ren, Qinglian and Trimble, Robert (2013) Modelling and Analyzing Electric Vehicles with Geared Transmission Systems: Enhancement of Energy Consumption and Performance. International Journal of Engineering Research & Technology, 2 (11). pp. 1215-1254. ISSN 2278-0181

Elmarakbi, Ahmed (2013) Modelling of Advanced Composite Materials using FEA. In: CCSA, Nov 2013, George Mason University, Fairfax, VA, USA. (Unpublished)

Elkady, M, Elmarakbi, Ahmed and El-Hage, H (2013) Numerical investigations of the positive effects of vehicle dynamics control systems on vehicle crash. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 15-21 November 2013, San Diego, California.

Elmarakbi, Ahmed (2013) Towards Zero Emission Transportation. In: Invited Talk, November 2013, Kuwait University, Kuwait. (Unpublished)

Elmarakbi, Ahmed, Elkady, M and Davies, John (2013) Under Pitch Control Techniques for Crashworthiness Improvement: Analytical Approach Using IHBM for Vehicle Control System and Extendable Structure. Journal of Applied Mechanical Engineering, 2 (4). pp. 1-8. ISSN 2168-9873

Elmarakbi, Ahmed (2013) Energy Efficient and Safe Vehicles: Status, Challenges and Future Directions. In: The 3rd Low Carbon Earth Summit-2013, Nov 2013, Xi'an, China. (Unpublished)

Habchi, C, Khaled, M, Lemenand, T, Della Valle, D, Elmarakbi, Ahmed and Peerhossaini, H (2013) A Semi-Analytical Approach for Temperature Distribution In Dean Flow. Heat and Mass Transfer, 50 (1). pp. 23-30. ISSN 1432-1181

Khaled, M, Ali, S, Hachem, F, Elmarakbi, Ahmed and Harambat, F (2013) Enhancement of the thermal performance of vehicle cooling module – New control approach for fuel consumption reduction. In: CFM "Congrès Français de Mécanique, 26 - 30 August, 2013, Bordeaux, France,.

Hachem, F, Habchi, C and Elmarakbi, Ahmed (2013) Flow visualization and velocity profile analysis over concave surface for gas turbine applications. In: CFM "Congrès Français de Mécanique, 26 - 30 August, 2013, Bordeaux, France.

Hallal, A, Elmarakbi, Ahmed, Shaito, A and Elhage, A (2013) Overview of Composite Materials and their Automotive Applications. In: Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. Wiley, UK, pp. 3-28. ISBN 978-1-1184-2386-8

Elmarakbi, Ahmed (2013) Vehicle Safety and low Carbon Technologies. In: Invited Presentation, Aug 2013, Hunan University, Changsha, China. (Unpublished)

Khaled, M, El-Hage, H, Elmarakbi, Ahmed, Harambat, F and Peerhossaini, H (2013) Aerothermal analysis of vehicle thermal soak – Temperature and heat flux measurements. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA,.

Khaled, M, El-Hage, H, Elmarakbi, Ahmed, Harambat, F and Peerhossaini, H (2013) Aerothermal management of vehicle heat exchangers – Parametric analysis. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA.

Abdulhay, B, Bourouga, C, Challita, F, Alzetto, S and Elmarakbi, Ahmed (2013) Experimental Approach for Thermal Contact Resistance Estimation at the Glass/ Metal Contact Interface. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA.

Habchi, C, El-Hage, H, Harion, J, Russeil, S, Bougeard, D, Menanteau, S, Ali, S and Elmarakbi, Ahmed (2013) Numerical simulation of the interaction between fluid flow and elastic flaps oscillations. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA.

Elmarakbi, Ahmed (2013) New Advanced Composite Materials for Automotive Applications. In: Invited Talk, Jul 2013, The American University in Cairo, Egypt. (Unpublished)

Ren, Qinglian, Elmarakbi, Ahmed and Trimble, Robert (2013) Analysis of 3 and 4 Branch Epicyclic Transmission Systems for Hybrid Electrical Vehicles using Matrix Method and TSA Tool. In: 2013 IEEE Intelligent Vehicles Symposium, 23-26 June 2013, Gold Coast City, Australia.

Elmarakbi, Ahmed, Elkady, M and MacIntyre, John (2013) Numerical Analysis of Vehicle-to-Vehicle Impact using Vehicle Dynamics Control Systems for Collision Mitigation. International Journal of Dynamics and Control, 1 (2). pp. 172-191. ISSN 2195-2698

Elmarakbi, Ahmed, Elkady, M and El-Hage, H (2013) Development of a New Crash/Dynamics Mathematical Model for crashworthiness enhancement of vehicle structures. International Journal of Crashworthiness, 18 (5). pp. 444-458. ISSN 1358-8265

Habchi, C, Russeil, S, Bougeard, D, Menanteau, S, Harion, J, Khaled, M and Elmarakbi, Ahmed (2013) Intensification of the heat transfer by generating vorticity and protrusions. In: SFT2013, 28 - 31 May 2013, Gerardmer, France.

Elmarakbi, Ahmed, Ren, Qinglian and Trimble, Robert (2013) Epicyclic Power Split Transmissions for Hybrid Electric Vehicles: Fuel Consumption, Vehicle Performance and Driving Aggressiveness. Global Journal of Research Engineering- Part B: Automotive Engineering, 13 (1). pp. 25-34. ISSN 0975-5861

Elmarakbi, Ahmed (2013) Future Direction of Collision Avoidance Systems. In: Invited Talk, May 2013, Centre for Collision Safety and Analysis. (Unpublished)

Elmarakbi, Ahmed, Rengaraj, Chandrasekaran, Wheatley, Alan and Elkady, M (2013) The Influence of Electronic Stability Control, Active Suspension, Driveline and Front Steering Integrated System on the Vehicle Ride and Handling. Global Journal of Research Engineering- Part B: Automotive Engineering, 13 (1). pp. 1-12. ISSN 0975-5861

Elmarakbi, Ahmed (2013) New BiW Architecture for Safe Vehicles. In: Invited Talk - The National Crash Analysis Center (NCAC), May 2013, Ashburn, VA, USA. (Unpublished)

Elmarakbi, Ahmed, Ren, Qinglian, Trimble, Robert and Elkady, M (2013) Performance Analysis of Hybrid and Full Electrical Vehicles Equipped with Continuously Variable Transmissions. Advances in Automobile Engineering, 2 (1). pp. 1-8. ISSN 2167-7670

Elmarakbi, Ahmed, Long, Y and MacIntyre, John (2013) Crash Analysis and Energy Absorption Characteristics of S-shaped Longitudinal Members. Thin-Walled Structures, 68. pp. 65-74. ISSN 0263-8231

Elmarakbi, Ahmed, Karznrik, V, Sennah, K, Altenhof, William and Chapman, M (2013) Crashworthiness of Vehicle-to-Pole Collisions using a Hybrid III 3-Year-Old Child Dummy. International Journal of Vehicle Systems Modelling and Testing, 8 (1). pp. 1-37. ISSN 1745-6436

Elmarakbi, Ahmed, Rengaraj, C, Wheatley, Alan and Elkady, M (2013) Integration of Active Chassis Control Systems for Improved Vehicle Handling Performance. Vehicle Systems Dynamics. ISSN 0042-3114

Elmarakbi, Ahmed, Dixon, Daniel, Trimble, Robert and Ren, Qinglian (2013) Modelling and Analyzing Hybrid Electric Vehicles with Single and Dual Epicyclic Power Split Transmissions. SAE International Journal of Passenger Car: Mechanical Systems, 6 (3). pp. 1538-1553.

Elkady, M, Elmarakbi, Ahmed, Knapton, David, Saleh, M, Abdelhameed, M and Bawady, A (2013) Theoretical and Experimental Analysis of Electromagnetic Variable Valve Timing Control Systems for Improvement of Spark Ignition Engine Performance. Advances in Automobile Engineering, 2 (3). pp. 1-8. ISSN 2167-7670

Elmarakbi, Ahmed (2012) Enhancement Vehicle’s Occupant Safety by using Vehicle Dynamics Control Systems in Vehicle-to-Vehicle Frontal Collision. In: FISITA 2012 World Automotive Congress, 27-30 November, 2012, Beijing, China. (Submitted)

Elmarakbi, Ahmed and Fielding, Niki (2012) Deformation and Energy Absorption Characteristics of Thin-Walled Structures. In: International Mechanical Engineering Congress and Exposition: Crashworthiness in Transportation Systems,, 13-19 Nov 2009, Florida, USA.

Bonhomme, J, Mollon, V, Elmarakbi, Ahmed, Vina, J and Argulles, A (2012) Finite Element Models For The Onset And Growth of Delamination In CFRP Laminates. In: 15th International Conference on Experimental Mechanics, 22-27 July 2012, Porto, Portugal.

elkady, M, Elmarakbi, Ahmed and MacIntyre, John (2012) Modelling Dynamics Control Systems to Improve Crash Characteristics and Occupant Behaviour. In: International Crashworthiness Conference (ICRASH2012), 18-20 July 2012, Milan, Italy. (Submitted)

Mollon, V, Bonhomme, Jorge, Elmarakbi, Ahmed, Argulles, A and Vina, J (2012) Numerical Analysis of Delamination Growth in Composite Materials using Two Step Extension and Cohesive Zone Methods. In: 15th European Conference on Composite Materials (ECCM15), 24 -28 June 2012, Venice, Italy.

Mollon, V, Bonhomme, Jorge, Elmarakbi, Ahmed, Arguelles, A. and Vina, J (2012) Finite element modelling of mode I delamination specimens by means of implicit and explicit solvers. Polymer Testing, 31 (3). pp. 404-410. ISSN 0142-9418

Elkady, Mustafa, Elmarakbi, Ahmed and MacIntyre, John (2012) Enhancement of Vehicle Safety and Improving Vehicle Yaw Behaviour Due to Offset Collisions Using Vehicle Dynamics. International Journal of Vehicle Safety, 6 (2). pp. 110-133. ISSN 1479-3105

Elkady, Mustafa and Elmarakbi, Ahmed (2012) Modelling and Analysis of Vehicle Crash System Integrated with Different VDCS under High Speed Impacts”. Central European Journal of Engineering, 2 (4). pp. 585-602. ISSN 1896-1541

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2012) Simulation of a Multibody Occupant Model During Vehicle Collision with Different Applications of Vehicle Control Systems. Journal of Multi-body Dynamics, 226 (3). pp. 220-244. ISSN 1464-4193

Elkady, M, Elmarakbi, Ahmed and MacIntyre, John (2012) The influence of Vehicle Dynamics Control System on the Occupant’s Dynamic response during a Vehicle collision. Journal of Automobile Engineering, 226 (11). pp. 1454-1471. ISSN 0954-4070

Elmarakbi, Ahmed, Karznrik, Vid, Sennah, Khaled, Altenhof, William and Chapman, Michael (2011) Enhancement of vehicle/roadside hardware crash: dynamic response of child occupant involved in vehicle/pole impact. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2011, Denver, Colorado, USA.

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2011) A study on vehicle dynamic control systems and their influence on vehicle collisions improvement. In: 14th International IEEE Conference on Intelligent Transportation Systems (ITSC 11), 5-7 Oct 2011, Washington D.C., USA.

Elmarakbi, Ahmed and Tann, J (2011) Development of new energy absorber members for vehicle crash analysis and safety evaluations using LS-DYNA. In: 2011 JSAE Annual Congress, 18-20 May 2011, Yokohama, Japan.

Elmarakbi, Ahmed, Elkady, Mustafa and Crolla, Dave (2011) A numerical study for optimizing vehicle dynamics control systems in offset impacts. In: SAE 2011 World Congress, 12-14 Apr 2011, Detroit, Michigan, USA.

Elmarakbi, Ahmed (2011) Finite element analysis of delamination growth in composite materials using LS-DYNA: Formulation and implementation of new cohesive elements. In: Advances in composite materials-ecodesign and analysis. InTech, pp. 409-428. ISBN 978-953-307-468-9

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2011) Development of a Novel Vehicle Dynamics/Crash Mathematical Model for Vehicle Crash Mitigation. International Journal of Vehicle Design, 59 (1). pp. 61-81. ISSN 0143-3369

Elmarakbi, Ahmed, Karznrik, Vid, Sennah, Khaled, Altenhof, William and Chapman, Michael (2011) Dynamic Analysis of Hybrid III 3-Year-Old Child Dummy in frontal collisions. International Journal of Vehicle Safety (IJVS), 5 (3). pp. 232-270. ISSN 1479-3105

Elmarakbi, Ahmed and Tann, J (2011) Dynamic Impact Analysis and Crash Behaviour of New Cone-Shape Longitudinal tubes. International Journal of Automotive Engineering. ISSN 2185-0984

Elmarakbi, Ahmed, Fielding, Niki and Hadavinia, Homayoun (2011) Finite element simulation of axial crush of thin-walled tubes with different cross-sections: vehicle/Pole impact applications. International Journal of Vehicle Structures and Systems, 3 (3). pp. 154-160. ISSN 0975-3060

Elmarakbi, Ahmed, Fielding, Niki and Homayoun, Hadavinia (2011) Finite element simulation of the axial crush of thin-walled tubes with different cross-sections: vehicle impact application. International Journal of Vehicle Structures and Systems. ISSN 0975-3060

Hadavinia, Homayoun, Dogan, F, Elmarakbi, Ahmed and Khalili, S (2011) Modelling of Low Velocity Impact on Laminated Composite Substructures. International Journal of Vehicle Structures and Systems, 3 (2). pp. 96-106. ISSN 0975-3060

Elmarakbi, Ahmed (2010) Mitigate the Vehicle Collision by Aiding of Vehicle Dynamics Control Systems. In: The Seventh International Conference on Engineering Computational Technology, 14 - 17 Sep 2010, Valencia, Spain. (Unpublished)

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2010) Mitigation of Vehicle Collision with the Aid of Vehicle Dynamic Control Systems. In: 7th International Conference on Engineering Computational Technology, 14-17 Sep 2010, Valencia, Spain.

Elmarakbi, Ahmed (2010) Analysis of a new front-end structure offset impact: mass-spring-damper models with piecewise linear characteristics. International Journal of Vehicle Systems Modelling and Testing (IJVSMT), 5 (4). pp. 292-311. ISSN 1745-6436

Elkady, Mustafa, Crolla, Dave and Elmarakbi, Ahmed (2010) A new mathematical model to study the influence of vehicle dynamics control on vehicle collision mitigation. In: FISITA 2010 World Automotive Congress on Automobiles and Sustainable Mobility, 30 May - 4 Jun 2010, Budapest, Hungary.

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2009) Finite element simulation of delamination growth in composite materials using LS-DYNA. Composites Science and Technology, 69 (14). pp. 2383-2391. ISSN 0266-3538

Elmarakbi, Ahmed and Fielding, Niki (2009) A new design of roadside pole structure: crash analysis of different longitudinal tubes using LS-DYNA. In: 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Elmarakbi, Ahmed (2009) Towards New Directions of Crashworthiness Improvement. In: Faculty of Engineering - Mataria, Helwan University, Cairo.

Elkady, Mustafa, Elmarakbi, Ahmed, Abdelhameed, M, Saleh, M and Wheatley, Alan (2009) A Continuous Variable Valve Timing Control System for Model SI Engine. In: 12th European Automotive Congress: EAEC 2009, 29 Jun - 1 Jul 2009, Bratislava, Slovakia.. (Unpublished)

Hu, Ning, Zemba, Y, Okabe, T, Yan, C, Fukunaga, Hisao and Elmarakbi, Ahmed (2008) A new cohesive model for simulating delamination propagation in composite laminates under transverse loads. Mechanics of Materials, 40 (11). pp. 920-935. ISSN 0167-6636

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2008) Quasi-static and dynamic analysis of delamination growth using new interfacial decohesion elements. In: The Sixth International Conference on Engineering Computational Technology, 2-5 Sep 2008, Athens, Greece.

Elmarakbi, Ahmed (2008) Mathematical methodology: incremental harmonic balance method and its application in automotive crashes. SAE Transactions Journal of Passenger Cars: Mechanical Systems, 116 (6). pp. 1579-1596. ISSN 0096-736X

Elmarakbi, Ahmed (2008) Development of mathematical models for evaluating child occupant impact dynamics and intrusions of the vehicle structure. In: International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 31 Oct - 6 Nov 2008, Boston, Massachusetts, USA.

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2007) Adaptive rate-dependent interface models: formulation and numerical analysis of progressive delaminatons in composite materials. In: 6th International Conference on Advanced Technology in Experimental Mechanics, 12-14 Sep 2007, Fukuoka, Japan. (Unpublished)

Elmarakbi, Ahmed, Hu, N and Fukunaga, H (2007) A New Rate-Dependent Cohesive Model for Simulating Dynamic Composite Delamination. In: 16th International Conference on Composite Materials ICCM-16, 8-13 Jul 2007, Kyoto, Japan.

Hu, Ning, Zemba, Y, Fukunaga, Hisao, Wang, H and Elmarakbi, Ahmed (2007) Stable numerical simulations of propagations of complex damages in composite structures under transverse loads. Composites Science and Technology, 67 (3-4). pp. 752-765. ISSN 0266-3538

Elmarakbi, Ahmed and Zu, Jean (2007) Mathematical modelling of a vehicle crash with emphasis on the dynamic response analysis of extendable cubic nonlinear dampers using the incremental harmonic balance method. Journal Of Automobile Engineering - Part D, 221 (2). pp. 143-156. ISSN 0954-4070

Elmarakbi, Ahmed and Zu, Jean (2007) Incremental harmonic balance method for analysis of standard/smart vehicles-to-rigid barrier frontal collision. International Journal of Vehicle Safety, 2 (3). pp. 288-315. ISSN 1479-3105

Elmarakbi, Ahmed (2006) A simple and effective method to predict the occupant dynamic response under sudden impulse loads. International Journal of Automotive Technology, 7 (7). pp. 769-776. ISSN 1229-9138

Elmarakbi, Ahmed (2006) Studying The Effects of Non-Extendable Hydraulic Absorbers with Cubic Nonlinear Characteristics on the Vehicle Dynamic Response under High Speed Impacts. In: FISITA 2006, WORLD AUTOMOTIVE CONGRESS, October 2006, Yokohama, Japan. (Unpublished)

Elmarakbi, Ahmed and Zu, Jean (2006) Crash Analysis and Modeling of Two Vehicles in Frontal Collisions using Two Types of Smart Front-End Structures: An Analytical Approach using IHBM. International Journal of Crashworthiness, 11. pp. 467-483. ISSN 1358-8265

Elmarakbi, Ahmed, Sennah, Khaled, Samaan, Magdy and Siriya, Praveen (2006) Crashworthiness of motor vehicle and traffic light pole in frontal collsions. Journal of Transportation Engineering, 132 (9). pp. 722-733. ISSN 0733-947X

Elmarakbi, Ahmed (2006) Probing Deformation-Induced Microstructural Evolution and it's Influence on Successive Deformation of Nanocrystalline Materials Using Multistep Nanoindentation. In: IFCAM, IMR, September 2006, Tohoku University, Sendai, Japan. (Unpublished)

Elmarakbi, Ahmed and Sennah, Khaled (2006) Frontal impact finite element modelling to develop FRP energy absorbing pole structure. International Journal of Automotive Technology, 7 (5). pp. 555-564. ISSN 1229-9138

Elmarakbi, Ahmed (2006) Damage and Delamination in Composites using LS-DYNA. In: Space Structure Laboratory, September 2006, Tohoku University, Sendai, Japan. (Unpublished)

Elmarakbi, Ahmed (2006) Implementation of New Adaptive Cohesive Elements for the Simulation of Delamination in Composite Materials in LS-DYNA. In: 5th LS-DYNA Forum, October 2006, Ulm, Germany. (Submitted)

Elmarakbi, Ahmed, Sennah, Khaled, Siriya, Praveen and Emam, A (2006) Parametric effects on the performance of traffic light poles in vehicle crashes. International Journal of Crashworthiness, 11 (3). pp. 217-230. ISSN 1358-8265

Elmarakbi, Ahmed and Zu, Jean (2005) Crashworthiness improvement of vehicle-to-rigid fixed barrier in full frontal impact using novel vehicle's front-end structures. International Journal of Automotive Technology, 6 (5). pp. 491-499. ISSN 1229-9138

Elmarakbi, Ahmed and Zu, Jean (2005) The effects of extendable hydraulic dampers on vehicle crashworthiness in various collision events. The Transaction of Society of Automotive Engineers in Japan, 36 (6). pp. 193-198. ISSN 0287-8321

Elmarakbi, Ahmed and Zu, Jean (2004) Dynamic analysis of smart structures for vehicle-to-vehicle frontal collsion alleviation. The Transactions of Society of Automotive Engineers in Japan, 35 (4). pp. 151-156. ISSN 0287-8321

Elmarakbi, Ahmed and Zu, Jean (2004) Dynamic modelling and analysis of smart vehicle structures for frontal collision improvement. International Journal of Automotive Technology, 5 (4). pp. 247-255. ISSN 1229-9138

Elmarakbi, Ahmed and Zu, Jean (2004) Vehicle-to-vehicle compatibility: theoretical foundation, numerical analysis and optimisation. Transactions of the Canadian Society for Mechanical Engineering, 28 (2). pp. 355-374. ISSN 0315-8977

Mollón, V, Bonhomme, J, Elmarakbi, Ahmed, Vina, J and Arguelles, A. Comparison of numerical and local partition methods in ADCB specimens. In: ICCS18 - 18th International Conference on Composite Structures, 15-18 June 2015, Lisbon, Portugal.