SURE

Article

Ahmad Mehrabi, Hamid and Mintz, Barry (1997) Influence of tempering on impact behaviour of quenched and tempered steels with low hardenability. Materials Science and Technology, 13 (12). pp. 997-1006. ISSN 12

Ahmad Mehrabi, Hamid, Salonitis, Konstantinos and Jolly, Mark (2016) The challenges for energy efficient casting processes. Procedia CIRP, 40. pp. 24-29. ISSN 2212-8271

Atkinson, Callum, Naveed, Nida, Haq, Mir Irfan Ul and Ahmad Mehrabi, Hamid (2022) High Cyclic Fatigue Behaviour of Varied Pitch Compression Springs for Automotive Applications. Journal of Robotics and Mechanical Engineering, 1 (1). ISSN 2770-4122

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Constitutive modelling of ductile damage matrix reinforced by platelets-like particles with imperfect interfaces: Application to graphene polymer nanocomposite materials. Composites Part B: Engineering. ISSN 1359-8368

Azoti, Wiyao and Elmarakbi, Ahmed (2017) Multiscale modelling of graphene platelets-based nanocomposite materials. Composite Structures, 168. pp. 313-321. ISSN 0263-8223

Azoti, Wiyao, Elmarakbi, Ahmed, El-Hage, Hisham and Elkady, Mustafa (2018) Elasto-plastic response of graphene nanoplatelets reinforced polymer composite materials. International Journal of Automotive Composites, 3 (2/3/4). pp. 226-236. ISSN 2051-8218

Chen, Meng, Baglee, David, Chu, Jiang Wei, Du, Danfeng and Guo, Xiurong (2017) Photocatalytic oxidation of NOx under visible light on asphalt pavement surface. Journal of Materials in Civil Engineering, 29 (9). p. 1. ISSN 0899-1561

Crolla, Dave, Levesley, Martin, Ramli, R and Stembridge, Neil (2007) Multibody co-simulation of a semi-active suspension. Proc IMechE Part K Journal of Multi-body Dynamics, 221 (1). pp. 99-116. ISSN 14644193

Crolla, Dave and Ren, Qinglian (2007) Analysis of a continuously variable transmission based on a twin epicyclic power split device. Society of Automotive Engineers. pp. 2007-01. ISSN 01487191

Elkady, M, Elmarakbi, Ahmed, Knapton, David, Saleh, M, Abdelhameed, M and Bawady, A (2013) Theoretical and Experimental Analysis of Electromagnetic Variable Valve Timing Control Systems for Improvement of Spark Ignition Engine Performance. Advances in Automobile Engineering, 2 (3). pp. 1-8. ISSN 2167-7670

Elkady, M, Elmarakbi, Ahmed and MacIntyre, John (2012) The influence of Vehicle Dynamics Control System on the Occupant’s Dynamic response during a Vehicle collision. Journal of Automobile Engineering, 226 (11). pp. 1454-1471. ISSN 0954-4070

Elkady, M., Elmarakbi, Ahmed, MacIntyre, John and Alhariri, M. (2016) Multi-body Integrated Vehicle-Occupant Models for Collision Mitigation and Vehicle Safety using Dynamics Control Systems. International Journal of System Dynamics Applications, 5 (2). pp. 81-125. ISSN 2160-9772

Elkady, Mustafa and Elmarakbi, Ahmed (2012) Modelling and Analysis of Vehicle Crash System Integrated with Different VDCS under High Speed Impacts”. Central European Journal of Engineering, 2 (4). pp. 585-602. ISSN 1896-1541

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2011) Development of a Novel Vehicle Dynamics/Crash Mathematical Model for Vehicle Crash Mitigation. International Journal of Vehicle Design, 59 (1). pp. 61-81. ISSN 0143-3369

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2012) Simulation of a Multibody Occupant Model During Vehicle Collision with Different Applications of Vehicle Control Systems. Journal of Multi-body Dynamics, 226 (3). pp. 220-244. ISSN 1464-4193

Elkady, Mustafa, Elmarakbi, Ahmed and MacIntyre, John (2012) Enhancement of Vehicle Safety and Improving Vehicle Yaw Behaviour Due to Offset Collisions Using Vehicle Dynamics. International Journal of Vehicle Safety, 6 (2). pp. 110-133. ISSN 1479-3105

Elkady, Mustafa, Elmarakbi, Ahmed, MacIntyre, John and Al-Hariri, Mohammad (2017) Collision mitigation and vehicle transportation safety using integrated vehicle dynamics control systems. Journal of Traffic and Transportation Engineering (English Edition), 4 (1). pp. 41-60. ISSN 2095-7564

Elmarakbi, Ahmed (2010) Analysis of a new front-end structure offset impact: mass-spring-damper models with piecewise linear characteristics. International Journal of Vehicle Systems Modelling and Testing (IJVSMT), 5 (4). pp. 292-311. ISSN 1745-6436

Elmarakbi, Ahmed (2008) Mathematical methodology: incremental harmonic balance method and its application in automotive crashes. SAE Transactions Journal of Passenger Cars: Mechanical Systems, 116 (6). pp. 1579-1596. ISSN 0096-736X

Elmarakbi, Ahmed (2006) A simple and effective method to predict the occupant dynamic response under sudden impulse loads. International Journal of Automotive Technology, 7 (7). pp. 769-776. ISSN 1229-9138

Elmarakbi, Ahmed, Azoti, Wiyao and Serry, Mohamed (2017) Multiscale modelling of hybrid glass fibres reinforced graphene platelets polyamide PA6 matrix composites for crashworthiness applications. Applied Materials Today, 6. ISSN 2352-9407

Elmarakbi, Ahmed, Dixon, Daniel, Trimble, Robert and Ren, Qinglian (2013) Modelling and Analyzing Hybrid Electric Vehicles with Single and Dual Epicyclic Power Split Transmissions. SAE International Journal of Passenger Car: Mechanical Systems, 6 (3). pp. 1538-1553.

Elmarakbi, Ahmed, Elkady, M and Davies, John (2013) Under Pitch Control Techniques for Crashworthiness Improvement: Analytical Approach Using IHBM for Vehicle Control System and Extendable Structure. Journal of Applied Mechanical Engineering, 2 (4). pp. 1-8. ISSN 2168-9873

Elmarakbi, Ahmed, Elkady, M and El-Hage, H (2013) Development of a New Crash/Dynamics Mathematical Model for crashworthiness enhancement of vehicle structures. International Journal of Crashworthiness, 18 (5). pp. 444-458. ISSN 1358-8265

Elmarakbi, Ahmed, Elkady, M and MacIntyre, John (2013) Numerical Analysis of Vehicle-to-Vehicle Impact using Vehicle Dynamics Control Systems for Collision Mitigation. International Journal of Dynamics and Control, 1 (2). pp. 172-191. ISSN 2195-2698

Elmarakbi, Ahmed, Fielding, Niki and Hadavinia, Homayoun (2011) Finite element simulation of axial crush of thin-walled tubes with different cross-sections: vehicle/Pole impact applications. International Journal of Vehicle Structures and Systems, 3 (3). pp. 154-160. ISSN 0975-3060

Elmarakbi, Ahmed, Fielding, Niki and Homayoun, Hadavinia (2011) Finite element simulation of the axial crush of thin-walled tubes with different cross-sections: vehicle impact application. International Journal of Vehicle Structures and Systems. ISSN 0975-3060

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2009) Finite element simulation of delamination growth in composite materials using LS-DYNA. Composites Science and Technology, 69 (14). pp. 2383-2391. ISSN 0266-3538

Elmarakbi, Ahmed, Jianhua, Wang and Azoti, Wiyao (2016) Nonlinear Elastic Moduli of Graphene Sheet-Reinforced Polymer Composites for Automotive Applications. International Journal of Solids and Structures, 81 (1). pp. 383-392. ISSN 0020-7683

Elmarakbi, Ahmed, Karagiannidis, Panagiotis, Ciappa, Alessandra, Innocente, Franco, Galise, Francesco, Martorana, Brunetto, Bertocchi, Francesco, Cristiano, Francesco, Villaro Ábalos, Elvira and Gómez, Julio (2019) 3-Phase Hierarchical Graphene-based Epoxy Nanocomposite Laminates for Automotive Applications. Journal of Materials Science & Technology, 35 (10). pp. 2169-2177. ISSN 1005-0302

Elmarakbi, Ahmed, Karznrik, V, Sennah, K, Altenhof, William and Chapman, M (2013) Crashworthiness of Vehicle-to-Pole Collisions using a Hybrid III 3-Year-Old Child Dummy. International Journal of Vehicle Systems Modelling and Testing, 8 (1). pp. 1-37. ISSN 1745-6436

Elmarakbi, Ahmed, Karznrik, Vid, Sennah, Khaled, Altenhof, William and Chapman, Michael (2011) Dynamic Analysis of Hybrid III 3-Year-Old Child Dummy in frontal collisions. International Journal of Vehicle Safety (IJVS), 5 (3). pp. 232-270. ISSN 1479-3105

Elmarakbi, Ahmed, Long, Y and MacIntyre, John (2013) Crash Analysis and Energy Absorption Characteristics of S-shaped Longitudinal Members. Thin-Walled Structures, 68. pp. 65-74. ISSN 0263-8231

Elmarakbi, Ahmed, Ren, Qinglian and Trimble, Robert (2013) Epicyclic Power Split Transmissions for Hybrid Electric Vehicles: Fuel Consumption, Vehicle Performance and Driving Aggressiveness. Global Journal of Research Engineering- Part B: Automotive Engineering, 13 (1). pp. 25-34. ISSN 0975-5861

Elmarakbi, Ahmed, Ren, Qinglian and Trimble, Robert (2013) Modelling and Analyzing Electric Vehicles with Geared Transmission Systems: Enhancement of Energy Consumption and Performance. International Journal of Engineering Research & Technology, 2 (11). pp. 1215-1254. ISSN 2278-0181

Elmarakbi, Ahmed, Ren, Qinglian, Trimble, Robert and Elkady, M (2013) Performance Analysis of Hybrid and Full Electrical Vehicles Equipped with Continuously Variable Transmissions. Advances in Automobile Engineering, 2 (1). pp. 1-8. ISSN 2167-7670

Elmarakbi, Ahmed, Rengaraj, C, Wheatley, Alan and Elkady, M (2013) Integration of Active Chassis Control Systems for Improved Vehicle Handling Performance. Vehicle Systems Dynamics. ISSN 0042-3114

Elmarakbi, Ahmed, Rengaraj, Chandrasekaran, Wheatley, Alan and Elkady, M (2013) The Influence of Electronic Stability Control, Active Suspension, Driveline and Front Steering Integrated System on the Vehicle Ride and Handling. Global Journal of Research Engineering- Part B: Automotive Engineering, 13 (1). pp. 1-12. ISSN 0975-5861

Elmarakbi, Ahmed, Rengaraj, Chandrasekaran, Wheatley, Alan and Elkady, M (2013) New integrated chassis control systems for vehicle handling performance enhancement. International Journal of Dynamics and Control, 1 (4). pp. 360-384. ISSN 2195-2698

Elmarakbi, Ahmed and Sennah, Khaled (2006) Frontal impact finite element modelling to develop FRP energy absorbing pole structure. International Journal of Automotive Technology, 7 (5). pp. 555-564. ISSN 1229-9138

Elmarakbi, Ahmed, Sennah, Khaled, Samaan, Magdy and Siriya, Praveen (2006) Crashworthiness of motor vehicle and traffic light pole in frontal collsions. Journal of Transportation Engineering, 132 (9). pp. 722-733. ISSN 0733-947X

Elmarakbi, Ahmed, Sennah, Khaled, Siriya, Praveen and Emam, A (2006) Parametric effects on the performance of traffic light poles in vehicle crashes. International Journal of Crashworthiness, 11 (3). pp. 217-230. ISSN 1358-8265

Elmarakbi, Ahmed and Tann, J (2011) Dynamic Impact Analysis and Crash Behaviour of New Cone-Shape Longitudinal tubes. International Journal of Automotive Engineering. ISSN 2185-0984

Elmarakbi, Ahmed and Zu, Jean (2005) Crashworthiness improvement of vehicle-to-rigid fixed barrier in full frontal impact using novel vehicle's front-end structures. International Journal of Automotive Technology, 6 (5). pp. 491-499. ISSN 1229-9138

Elmarakbi, Ahmed and Zu, Jean (2004) Dynamic analysis of smart structures for vehicle-to-vehicle frontal collsion alleviation. The Transactions of Society of Automotive Engineers in Japan, 35 (4). pp. 151-156. ISSN 0287-8321

Elmarakbi, Ahmed and Zu, Jean (2004) Dynamic modelling and analysis of smart vehicle structures for frontal collision improvement. International Journal of Automotive Technology, 5 (4). pp. 247-255. ISSN 1229-9138

Elmarakbi, Ahmed and Zu, Jean (2007) Incremental harmonic balance method for analysis of standard/smart vehicles-to-rigid barrier frontal collision. International Journal of Vehicle Safety, 2 (3). pp. 288-315. ISSN 1479-3105

Elmarakbi, Ahmed and Zu, Jean (2007) Mathematical modelling of a vehicle crash with emphasis on the dynamic response analysis of extendable cubic nonlinear dampers using the incremental harmonic balance method. Journal Of Automobile Engineering - Part D, 221 (2). pp. 143-156. ISSN 0954-4070

Elmarakbi, Ahmed and Zu, Jean (2004) Vehicle-to-vehicle compatibility: theoretical foundation, numerical analysis and optimisation. Transactions of the Canadian Society for Mechanical Engineering, 28 (2). pp. 355-374. ISSN 0315-8977

Elmarakbi, Ahmed and Zu, Jean (2005) The effects of extendable hydraulic dampers on vehicle crashworthiness in various collision events. The Transaction of Society of Automotive Engineers in Japan, 36 (6). pp. 193-198. ISSN 0287-8321

Habchi, C, Harion, J, Russeil, S, Bougeard, D, Hachem, F and Elmarakbi, Ahmed (2013) Chaotic Mixing By Longitudinal Vorticity. Chemical Engineering Science, 104. pp. 439-450. ISSN 0009-2509

Habchi, C, Khaled, M, Lemenand, T, Della Valle, D, Elmarakbi, Ahmed and Peerhossaini, H (2013) A Semi-Analytical Approach for Temperature Distribution In Dean Flow. Heat and Mass Transfer, 50 (1). pp. 23-30. ISSN 1432-1181

Habchi, Charbel, Lemenand, Thierry, Della Valle, Dominique, Khaled, Mahmoud, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Mixing assessment by chemical probe. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1411-1420. ISSN 1226-086X

Hadavinia, Homayoun, Dogan, F, Elmarakbi, Ahmed and Khalili, S (2011) Modelling of Low Velocity Impact on Laminated Composite Substructures. International Journal of Vehicle Structures and Systems, 3 (2). pp. 96-106. ISSN 0975-3060

Khaled, M., Gad ElRab, M., Habchi, C., Al Shaer, A., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2015) Analysis and Modeling of the Thermal Soak Phase of a Vehicle – Temperature and Heat Flux Measurements. International Journal of Automotive Technology, 16 (2). pp. 221-229. ISSN 1470-9511

Khaled, M., Hachem, F., El Hage, H., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2016) Experimental Study of the Flow Induced by a Vehicle Fan and the Effect of Engine Blockage in a Simplified Model. International Journal of Automotive Technology, 17 (4). pp. 617-627. ISSN 1229-9138

Khaled, Mahmoud, Al-Shaer, A., Ramadan, Mohamad, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Sensitivity and applications of a new method for the simultaneous measurement of convective and radiative heat flux in underhood applications—toward multiple versions. Measurement Science and Technology, 25 (3). pp. 1-12. ISSN 0957-0233

Khaled, Mahmoud, Habchi, Charbel, Harambat, Fabien, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Leakage effects in car underhood aerothermal management: temperature and heat flux analysis. Heat and Mass Transfer, 50 (10). pp. 1455-1464. ISSN 0947-7411

Khaled, Mahmoud, Ramadan, Mohamad, El-Hage, Hicham, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Review of underhood aerothermal management: Towards vehicle simplified models. Applied Thermal Engineering, 73 (1). pp. 842-858. ISSN 1359-4311

Khatib, S A, Naveed, Nida and Anwar, N (2020) The Study of Diverse Personalities that Hinder Harmony across Engineering Team. Journal of Biogeneric Science and Research, 5 (1). pp. 1-11. ISSN 2692-1081

Knowles, Michael (2013) Through-life Management of Electric Vehicles. Procedia CIRP, 11. pp. 260-265.

Knowles, Michael (2013) The use of feasibility study funding to develop an independent research strategy. Journal of Postdoctoral Affairs, 3 (1). ISSN 2328-9791

Knowles, Michael and Morris, Adrian (2013) Impact of Second Life Electric Vehicle Batteries on the Viability of Renewable Energy Sources. British Journal of Applied Science & Technology, 4 (1). pp. 152-167. ISSN 2231-0843

Knowles, Michael and Morris, Adrian (2014) The Impact of second Life Electric vehicle Batteries on the Viability of renewable Energy Sources. British Journal of Applied Science and Technology, 4 (1). pp. 152-167. ISSN 2231-0843

Knowles, Michael, Scott, Helen and Baglee, David (2012) The Effect of Driving Style on Electric Vehicle Performance, Economy and Perception. International Journal of Electric and Hybrid Vehicles, 4 (3). pp. 228-227. ISSN 1751-4088

Kok, Dirk, Morris, Adrian and Knowles, Michael (2013) Novel EV drive train topology — A review of the current topologies and proposal for a model for improved drivability. Power Electronics and Applications (EPE), 2013 15th European Conference on. pp. 1-10.

Kok, Dirk, Morris, Adrian, Knowles, Michael and Baglee, David (2014) Converter simulation using SimPowerSystems a comparison of drive cycles and control strategies. Renewable Energy Research and Applications (ICRERA), 2013 International Conference on. pp. 800-805.

Mollon, V, Bonhomme, Jorge, Elmarakbi, Ahmed, Arguelles, A. and Vina, J (2012) Finite element modelling of mode I delamination specimens by means of implicit and explicit solvers. Polymer Testing, 31 (3). pp. 404-410. ISSN 0142-9418

Mollon, V., Bonhomme, Jorge, Elmarakbi, Ahmed, Vina, J. and Arguelles, A. (2015) Comparison of numerical, empirical and local partition methods in ADCB specimens. International Journal of Automotive Composites, 1 (4). pp. 299-312. ISSN 2051-8218

Naveed, Nida (2019) Design and Analysis of a Disc Brake Rotor for Optimal Performance in Racing. World Journal of Modelling and Simulation. ISSN 1746-7233

Naveed, Nida (2020) Guidelines to select suitable parameters for contour method stress measurements. Archives of Mechanics, 72 (1). pp. 39-58. ISSN 0373-2029

Naveed, Nida and Whitford, Michael (2019) Design Analysis of Bicycle Brake Disc for Carbon Fibre - Lightweight Material. The International Journal of Integrated Engineering, 11 (8). pp. 91-109. ISSN 2229-838X

Pourahmad, P, Abbasi, Mehrdad and Ahmad Mehrabi, Hamid (2012) Bimetal friction stir welding of aluminum to magnesium. Journal of Advanced Materials and Processing, 1 (1).

Rehman, Sheikh, Gomez, Julio, Villaro, Elvira, Cossey, Dwane and Karagiannidis, Panagiotis (2022) Bio-Based Epoxy/Amine Reinforced with Reduced Graphene Oxide (rGO) or GLYMO-rGO: Study of Curing Kinetics, Mechanical Properties, Lamination and Bonding Performance. Nanomaterials. ISSN 2079-4991

Ren, Qinglian, Crolla, Dave and Morris, Adrian (2009) Effect of transmission design on Electric Vehicle (EV) performance. IEEE Conference on Vehicle Power and Propulsion (VPPC), 2009. ISSN 1938-8756

Ren, Qinglian, Crolla, Dave and Morris, Adrian (2010) The effect of Transmission Design on Electric Vehicle (EV) Performance. The Journal of Energy and Power Engineering, 4 (3). pp. 46-51. ISSN 1934-8975

Robson, Kenneth, MacIntyre, John and Trimble, Robert Measuring the status and alignment of maintenance and manufacturing strategies – the development of a new model and diagnostic tool. Journal of Quality in Maintenance Engineering, 19 (4). pp. 381-397. ISSN 1355-2511

Robson, Kenneth, MacIntyre, John and Trimble, Robert (2013) Towards a Simpler Selection Process for Maintenance Strategies. International Journal of Business and Management, 8 (6). ISSN 1833-3850

Scott, Helen, Knowles, Michael, Morris, Adrian and Kok, Dirk (2012) The Role of a Driving Simulator in Driver Training to Improve Fuel Economy. Proceedings of Driving Simulator Conference Europe 2012. pp. 313-325. ISSN 0769-0266

Sheikh, Muhammad, Elmarakbi, Ahmed and Elkady, M (2017) Thermal Runaway Detection of Cylindrical 18650 Lithium-ion Battery under Quasi-Static Loading Conditions. Journal of Power Sources, 370. pp. 61-70. ISSN 0378-7753

Trimble, Robert, Copeland, Keith, MacIntyre, John and Smith, Peter (2013) The Use and Impact of Manufacturing Productivity Improvement Tools and Methodologies within the Automotive Component Industry. Engineering Management Research, 2 (1). ISSN 1927-7318

Trimble, Robert and O'kane, James (2008) Migration Issues in Modularity for 1st Tier Automotive Suppliers. International Journal of Business and Management, 3 (5). pp. 57-68. ISSN 1833-3850

Waton, A, Kakwani, R, Cooke, N J, Litchfield, D, Kok, Dirk, Middleton, Helen and Irwin, L (2011) Immobilisation of the Knee and Ankle and its Impact on Drivers braking Times. Journal of Bone and Joint Surgery, 93-B (7). pp. 928-931. ISSN 0301-620X

Xie, C, Elmarakbi, Ahmed, Yongkuo, L and Jizhou, Z (2016) A Dynamic Ordered Concept Lattice Based Algorithm for Early Diagnosis of NPP Faults. Progress in Nuclear Energy, 92. pp. 22-28. ISSN 0149-1970

salemi. G, Ali and Ahmad Mehrabi, Hamid (2016) Synthesis and characterization of silica mesoporous material produced by hydrothermal continues pH adjusting path way. Materials International, 26 (4). pp. 411-414. ISSN 1002-0071

Book Section

Ahmad Mehrabi, Hamid, Jolly, Mark and Salonitis, Konstantinos (2016) Road-Mapping towards a Sustainable Lower Energy Foundry. In: Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies (52). Springer. ISBN 9783319320960

Campos, Jamie, Jantunen, Erkki, Baglee, David, Gilabert, Eduardo, Fumagali, Luca and Emmanouilidis, Christos (2016) The Use of Mobile Technologies and Their Economic Benefits in Maintenance. In: Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Springer International Publishing, Springer International Publishing Switzerland, pp. 69-71. ISBN 978-3-319-27062-3

Dixon, Derek, Robson, Kenneth and Baglee, David (2020) The development of a maintenance gap analysis tool for use within the automotive supply chain: A case study perspective. In: Advances in Asset Management and Condition Monitoring. Smart Innovation, Systems and Technologies, 166 . Springer, pp. 135-146. ISBN 9783030577445

Elmarakbi, Ahmed and Azoti, Wiyao (2018) Mechanical prediction of graphene-based polymer nanocomposites for energy-efficient and safe vehicles. In: Experimental characterization, predictive mechanical and thermal modeling of nanostructures and their polymer composites. Micro and Nano Technologies . Elsevier, pp. 159-177. ISBN 978-0-323-48061-1

Elmarakbi, Ahmed and Azoti, Wiyao (2018) State of the Art of Graphene Lightweighting Nanocomposites for Automotive Applications. In: Experimental characterization, predictive mechanical and thermal modeling of nanostructures and their polymer composites. Micro and Nano Technologies . Elsevier, pp. 1-23. ISBN 978-0-323-48061-1

Hallal, A, Elmarakbi, Ahmed, Shaito, A and Elhage, A (2013) Overview of Composite Materials and their Automotive Applications. In: Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. Wiley, UK, pp. 3-28. ISBN 978-1-1184-2386-8

Hu, N and Elmarakbi, Ahmed (2013) Damage propagation in FRP laminates structures under transverse quasi- static and low-velocity impact loadings. In: Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. Wiley, pp. 257-292. ISBN 978-1-118-42386-8

Knowles, Michael and Baglee, David (2015) Ultra Low Carbon Vehicle Management Based on Telematic Monitoring. In: Through-Life Engineering Services. Decision Engineering . Springer International Publishing, pp. 83-94. ISBN 978-3-319-12110-9

Logeswaran, Iswariya, Eissa, Hazem and Almadhoun, Randa (2024) Autonomous Vehicle Pedestrian Detection & Traffic Sign Recognition Using YOLOv8. In: 2024 29th International Conference on Automation and Computing (ICAC). IEEE, pp. 1-6. ISBN 979-8-3503-6088-2

Middleton, Helen (2007) Driver Eye Movement During Route Navigation Information Search. In: Infotainment Systems. SAE International. ISBN 978-0-7680-1943-8

Middleton, Helen, Westwood, Diane, Robson, Jeremy and Kok, Dirk (2005) Assessment and decision criteria for driving competence in the elderly. In: Traffic and Transport Psychology: Theory and Application. Elsevier, pp. 101-113. ISBN 0080443796

Wheatley, Alan, Warren, David and Das, Sujit (2014) Development of Low Cost Carbon Fibre for Automotive Applications. In: Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. John Wiley & Sons, pp. 51-73. ISBN 9781118423868

Wheatley, Alan, Warren, David and Das, Sujit (2014) Low Cost Carbon Fibre: Applications, Performance and Cost Models. In: Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. John Wiley & Sons, pp. 405-434. ISBN 9781118535288

Conference or Workshop Item

Abdulhay, B, Bourouga, C, Challita, F, Alzetto, S and Elmarakbi, Ahmed (2013) Experimental Approach for Thermal Contact Resistance Estimation at the Glass/ Metal Contact Interface. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA.

Ahmad Mehrabi, Hamid, Salonitis, Konstantinos and Jolly, Mark (2016) Sustainable Investment Casting. In: 14th WORLD CONFERENCE IN INVESTMENT CASTING, 17-20 April 2016, Paris, France.

Ahmed, D., El-Safty, Sherif, Khalil, K., Dewidar, M., Abdelsalam, M. and Elmarakbi, Ahmed (2015) Nitrogen-Doped Titanium/Carbon Nanofibers Mats as Promising Oxygen Reduction Reaction Electrocatalysts in Acidic Media. In: Nanomaterials: Application & Properties 2015, 16-23 Sep 2015, Lviv, Ukraine. (Unpublished)

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Constitutive Modelling of Graphene Platelets Reinforced Polymer Composite Materials with Imperfect Interfaces. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA. (Unpublished)

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Micromechanics Modelling of Graphene Platelets Reinforced Polymer Composite Materials With Imperfect Interfaces. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA.

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Multi scale modelling of graphene platelets reinforced polymer matrix composite materials. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal. (Unpublished)

Azoti, Wiyao, Elmarakbi, Ahmed, El-Hage, H. and Elkady, M. (2016) Hierarchical modelling of carbon fibers graphene reinforced polymer composites materials. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal. (Unpublished)

Baglee, David, Jantunen, Erkki and Sharma, Pankaj (2016) Identifying Organisational Requirements for the Implementation of an Advanced Maintenance Strategy in Small to Medium Enterprises (SME). In: InCoME 2016, 30-31 Aug 2016, University of Manchester.

Baglee, David and Knowles, Michael (2012) Developing RCM Strategy for Hydrogen Fuel Cells Utlising Online E-Condition Monitoring. In: COMADEM 2012: 25th International Congress on Condition Monitoring and Diagnostic Engineering Management, 18-20 Jun 2012, Huddersfield, UK. (Unpublished)

Bonhomme, J, Mollon, V, Elmarakbi, Ahmed, Vina, J and Argulles, A (2012) Finite Element Models For The Onset And Growth of Delamination In CFRP Laminates. In: 15th International Conference on Experimental Mechanics, 22-27 July 2012, Porto, Portugal.

Bravo-Imaz, Iñaki, Baglee, David, García-Arribas, Alfredo, Ferreiro, Susana and Fernandez, Santiago (2014) Mechanical fault detection in gearboxes through the analysis of the motor feeding current signature. In: Comadem 2014 - Implications of life cycle analysis in asset and maintenance management, 16-18 Sep 2014, Brisbane Convention and Exhibition Centre, Australia. (Unpublished)

Campos, Jamie, Jantunen, Erkki, Baglee, David, Gilabert, Eduardo, Fumagalli, Luca and Emmanouilidis, Christos (2016) The Use of Mobile Technologies and Their Economic Benefits in Maintenance. In: 10th World Congress on Engineering Asset Management – WCEAM 2015, 28-30 Sep 2015, Tampere, Finland.

Crolla, Dave, Hu, Zhuoneng, Ren, Qinglian, Morris, Adrian and Kok, Dirk (2010) Design and Implementation of Power Management System for Fuel Cell and Battery Powered Buses. In: 25th World Electric Vehicle Symposium and Exposition; EVS 25, 5-9 Nov 2010, Shenzhen, China. (Unpublished)

Crolla, Dave, Ren, Qinglian and Morris, Adrian (2009) Performance comparisons of single and dual epicyclic power split transmissions for hybrid electric vehicles. In: 12th EAEC European Automotive Congress; EAEC 2009, 29 Jun - 1 Jul 2009, Bratislava, Slovak Republic.

Crolla, Dave and Rengaraj, Chandrasekaran (2009) Integration of active driveline, active steering, active suspension and active brake for an improved vehicle dynamic performance. In: 21st IAVSD (International Association for Vehicle System Dynamics) International Symposium on Dynamics of Vehicles on Roads and Tracks; IAVSD'09, 17-21 Aug 2009, Kth, Stockholm, Sweden. (Unpublished)

Dixon, Derek, Baglee, David, Robson, Kenneth and Sharma, Pankaj (2016) An Identification of the Enabling Factors for the Development of a Unified Approach to Maintenance Strategy Development within the Automotive Supply Chain. In: InCoME 2016, 30-31 Aug 2016, University of Manchester.

Dixon, Derek, Robson, Kenneth, Wheatley, Alan and Baglee, David (2015) Improving automotive supply chain performance through maintenance strategy development. In: EuroMaintenance 2016, 30 May-1 June 2016, Athens, Greece.

Elkady, M, Elmarakbi, Ahmed and El-Hage, H (2013) Numerical investigations of the positive effects of vehicle dynamics control systems on vehicle crash. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 15-21 November 2013, San Diego, California.

Elkady, M. and Elmarakbi, Ahmed (2014) Enhancement Of Occupant Safety During Frontal Collisions using New Vehicle/Occupant Interaction Modelling with VDC Systems and Smart Structures. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 14 - 20 Nov 2014, Montreal, Canada.

Elkady, M. and Elmarakbi, Ahmed (2016) Using an Extendable Bumper With an Aid of Vehicle Dynamics Control System to Improve the Occupant Safety in Frontal Vehicle-to-Vehicle Collision Scenario. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA.

Elkady, M., Elmarakbi, Ahmed and MacIntyre, John (2014) Improvement of Vehicle Safety by using Vehicle Dynamics Control Systems Alongside an Extendable Bumper: A New Mathematical Methodology. In: FISITA 2014 World Congress, 2-6 Jun 2015, Masstricht, The Netherlands.

Elkady, M., Elmarakbi, Ahmed and MacIntyre, John (2016) Integrated Active and Semi-Active Suspension Control System Vehicle Collision Alleviation. In: FISITA 2016 World Automotive Congress, 26-30 Sep 2016, Busan, South Korea. (Unpublished)

Elkady, Mustafa, Crolla, Dave and Elmarakbi, Ahmed (2010) A new mathematical model to study the influence of vehicle dynamics control on vehicle collision mitigation. In: FISITA 2010 World Automotive Congress on Automobiles and Sustainable Mobility, 30 May - 4 Jun 2010, Budapest, Hungary.

Elkady, Mustafa, Elmarakbi, Ahmed, Abdelhameed, M, Saleh, M and Wheatley, Alan (2009) A Continuous Variable Valve Timing Control System for Model SI Engine. In: 12th European Automotive Congress: EAEC 2009, 29 Jun - 1 Jul 2009, Bratislava, Slovakia.. (Unpublished)

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2010) Mitigation of Vehicle Collision with the Aid of Vehicle Dynamic Control Systems. In: 7th International Conference on Engineering Computational Technology, 14-17 Sep 2010, Valencia, Spain.

Elkady, Mustafa, Elmarakbi, Ahmed and Crolla, Dave (2011) A study on vehicle dynamic control systems and their influence on vehicle collisions improvement. In: 14th International IEEE Conference on Intelligent Transportation Systems (ITSC 11), 5-7 Oct 2011, Washington D.C., USA.

Elmarakbi, Ahmed (2006) Damage and Delamination in Composites using LS-DYNA. In: Space Structure Laboratory, September 2006, Tohoku University, Sendai, Japan. (Unpublished)

Elmarakbi, Ahmed (2008) Development of mathematical models for evaluating child occupant impact dynamics and intrusions of the vehicle structure. In: International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 31 Oct - 6 Nov 2008, Boston, Massachusetts, USA.

Elmarakbi, Ahmed (2013) Energy Efficient and Safe Vehicles: Status, Challenges and Future Directions. In: The 3rd Low Carbon Earth Summit-2013, Nov 2013, Xi'an, China. (Unpublished)

Elmarakbi, Ahmed (2015) Enhanced Graphene Nanocomposites Materials for vehicle structures. In: National Institute for Material Sciences (NIMS), 15-17 Feb 2017, Tokyo Big Sight, Japan. (Unpublished)

Elmarakbi, Ahmed (2012) Enhancement Vehicle’s Occupant Safety by using Vehicle Dynamics Control Systems in Vehicle-to-Vehicle Frontal Collision. In: FISITA 2012 World Automotive Congress, 27-30 November, 2012, Beijing, China. (Submitted)

Elmarakbi, Ahmed (2013) Future Direction of Collision Avoidance Systems. In: Invited Talk, May 2013, Centre for Collision Safety and Analysis. (Unpublished)

Elmarakbi, Ahmed (2015) Hierarchical Graphene Composites for Automotive. In: 2nd Graphene World Summit 2015, 4-6 Nov 2015, Barcelona, Spain. (Unpublished)

Elmarakbi, Ahmed (2006) Implementation of New Adaptive Cohesive Elements for the Simulation of Delamination in Composite Materials in LS-DYNA. In: 5th LS-DYNA Forum, October 2006, Ulm, Germany. (Submitted)

Elmarakbi, Ahmed (2016) Innovative Graphene-based Polymer Composites for Automotive Applications. In: Annual Automotive Interior Design Summit, 14 Mar 2016, Stuttgart, Germany. (Unpublished)

Elmarakbi, Ahmed (2015) Material Concepts and Challenges for Vehicle Lightweighting: Modelling of Graphene-based Polymer Composites. In: 2nd Mechanics of Composites (MECHCOMP2016), 11-14 Jul 2016, Porto, Portugal. (Unpublished)

Elmarakbi, Ahmed (2010) Mitigate the Vehicle Collision by Aiding of Vehicle Dynamics Control Systems. In: The Seventh International Conference on Engineering Computational Technology, 14 - 17 Sep 2010, Valencia, Spain. (Unpublished)

Elmarakbi, Ahmed (2013) Modelling of Advanced Composite Materials using FEA. In: CCSA, Nov 2013, George Mason University, Fairfax, VA, USA. (Unpublished)

Elmarakbi, Ahmed (2013) New Advanced Composite Materials for Automotive Applications. In: Invited Talk, Jul 2013, The American University in Cairo, Egypt. (Unpublished)

Elmarakbi, Ahmed (2013) New BiW Architecture for Safe Vehicles. In: Invited Talk - The National Crash Analysis Center (NCAC), May 2013, Ashburn, VA, USA. (Unpublished)

Elmarakbi, Ahmed (2015) Novel Composite Materials for Automotive Applications: Concepts and Challenges for Energy-Efficient and Safe Vehicles. In: 10th International Conference on Composites Science and Technology, ICCST/10, 2-4 September 2015, Lisbon, Portugal.

Elmarakbi, Ahmed (2006) Probing Deformation-Induced Microstructural Evolution and it's Influence on Successive Deformation of Nanocrystalline Materials Using Multistep Nanoindentation. In: IFCAM, IMR, September 2006, Tohoku University, Sendai, Japan. (Unpublished)

Elmarakbi, Ahmed (2006) Studying The Effects of Non-Extendable Hydraulic Absorbers with Cubic Nonlinear Characteristics on the Vehicle Dynamic Response under High Speed Impacts. In: FISITA 2006, WORLD AUTOMOTIVE CONGRESS, October 2006, Yokohama, Japan. (Unpublished)

Elmarakbi, Ahmed (2009) Towards New Directions of Crashworthiness Improvement. In: Faculty of Engineering - Mataria, Helwan University, Cairo.

Elmarakbi, Ahmed (2013) Towards Zero Emission Transportation. In: Invited Talk, November 2013, Kuwait University, Kuwait. (Unpublished)

Elmarakbi, Ahmed (2013) Vehicle Safety and low Carbon Technologies. In: Invited Presentation, Aug 2013, Hunan University, Changsha, China. (Unpublished)

Elmarakbi, Ahmed and Azoti, Wiyao (2016) Crashworthiness modelling of hierarchical short glass fibres reinforced graphene polymer composites materials. In: ICILSM2016, 22-26 May 2016, Turin, Italy.

Elmarakbi, Ahmed and Azoti, Wiyao (2015) Novel composite materials for automotive applications: concepts and challenges for energy-efficient and safe vehicles. In: 10th International Conference on Composite Science and Technology, ICCST/10, 2-4 Sep 2015, Instituto Superior Tecnico, Lisboa, Portugal.

Elmarakbi, Ahmed and Basso, M. (2016) Multiscale Analysis of the Mechanical Performance improvements of composites CFRP laminates, and composites with short glass fibers, through the addition of Nanoplatelets of Graphene. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal.

Elmarakbi, Ahmed, Elkady, Mustafa and Crolla, Dave (2011) A numerical study for optimizing vehicle dynamics control systems in offset impacts. In: SAE 2011 World Congress, 12-14 Apr 2011, Detroit, Michigan, USA.

Elmarakbi, Ahmed and Fielding, Niki (2012) Deformation and Energy Absorption Characteristics of Thin-Walled Structures. In: International Mechanical Engineering Congress and Exposition: Crashworthiness in Transportation Systems,, 13-19 Nov 2009, Florida, USA.

Elmarakbi, Ahmed and Fielding, Niki (2009) A new design of roadside pole structure: crash analysis of different longitudinal tubes using LS-DYNA. In: 7th European LS-DYNA Conference, 14-15 May 2009, Salzburg, Austria.

Elmarakbi, Ahmed, Hu, N and Fukunaga, H (2007) A New Rate-Dependent Cohesive Model for Simulating Dynamic Composite Delamination. In: 16th International Conference on Composite Materials ICCM-16, 8-13 Jul 2007, Kyoto, Japan.

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2008) Quasi-static and dynamic analysis of delamination growth using new interfacial decohesion elements. In: The Sixth International Conference on Engineering Computational Technology, 2-5 Sep 2008, Athens, Greece.

Elmarakbi, Ahmed, Karznrik, Vid, Sennah, Khaled, Altenhof, William and Chapman, Michael (2011) Enhancement of vehicle/roadside hardware crash: dynamic response of child occupant involved in vehicle/pole impact. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2011, Denver, Colorado, USA.

Elmarakbi, Ahmed and Martorana, B (2015) Graphene-based Composite Materials for Automotives. In: 20th International Conference on Composite Materials, ICCM20, 19-24 Jul 2015, Copenhagen, Denmark.

Elmarakbi, Ahmed and Tann, J (2011) Development of new energy absorber members for vehicle crash analysis and safety evaluations using LS-DYNA. In: 2011 JSAE Annual Congress, 18-20 May 2011, Yokohama, Japan.

González-Ortega, David, Scott, Helen, Javier Díaz-Pernas, Francisco and Knowles, Michael (2014) 3D Computer Vision and Wireless Sensor Applications in an-experimental Study on Electric Vehicle Driving in Roundabout Negotiation Scenarios. In: European Electric Vehicle Congress, 3-5 Dec 2014, Brussels, Belgium.

Habchi, C, El-Hage, H, Harion, J, Russeil, S, Bougeard, D, Menanteau, S, Ali, S and Elmarakbi, Ahmed (2013) Numerical simulation of the interaction between fluid flow and elastic flaps oscillations. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA.

Habchi, C, Russeil, S, Bougeard, D, Menanteau, S, Harion, J, Khaled, M and Elmarakbi, Ahmed (2013) Intensification of the heat transfer by generating vorticity and protrusions. In: SFT2013, 28 - 31 May 2013, Gerardmer, France.

Hachem, F, Habchi, C and Elmarakbi, Ahmed (2013) Flow visualization and velocity profile analysis over concave surface for gas turbine applications. In: CFM "Congrès Français de Mécanique, 26 - 30 August, 2013, Bordeaux, France.

Hall, Lynne, Hall, Marc, Middleton, Helen and Morris, Adrian (2010) Future Scenarios: LCV and Software Sector. In: 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition (EVS 25), 5-8 Nov 2010, Shenzhen, China.

Hall, Lynne, Hall, Marc, Middleton, Helen and Morris, Adrian (2010) A Study into Driver Perspective of Visual Comfort for Electric Vehicles. In: 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition (EVS 25), 7-9 November 2010, Shenzhen, China.

Jantunen, Erkki, El-Thalji, Idriss, Baglee, David and Lagö, Thomas (2014) Problems with using Fast Fourier Transform for rotating equipment: Is it time for an update? In: Comadem 2014 - Implications of life cycle analysis in asset and maintenance management, 16-18 Sep 2014, Brisbane Convention and Exhibition Centre, Australia. (Unpublished)

Karagiannidis, Panagiotis (2019) Development of graphene-based materials from printing inks and coatings to structural composites. In: Invited Talk: Seminars on Next Generation Materials and Microsystems, 18 October 2019, Department of Engineering, Durham University.

Khaled, M, Ali, S, Hachem, F, Elmarakbi, Ahmed and Harambat, F (2013) Enhancement of the thermal performance of vehicle cooling module – New control approach for fuel consumption reduction. In: CFM "Congrès Français de Mécanique, 26 - 30 August, 2013, Bordeaux, France,.

Khaled, M, El-Hage, H, Elmarakbi, Ahmed, Harambat, F and Peerhossaini, H (2013) Aerothermal analysis of vehicle thermal soak – Temperature and heat flux measurements. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA,.

Khaled, M, El-Hage, H, Elmarakbi, Ahmed, Harambat, F and Peerhossaini, H (2013) Aerothermal management of vehicle heat exchangers – Parametric analysis. In: ASME FEDSM 2013, 7-11 July, 2013, Nevada, USA.

Khaled, M., Ramadan, M., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2014) Underhood Aerothermal Management of Leakage Zones – Temperature Measurements. In: 13th International Conference on Simulation and Experiments in Heat Transfer and its Applications, 2-4 Jul 2014, A Coruña, Spain.

Kinnunen, Sini-Kaisu, Marttonen-Arola, Salla, Yla-Kujala, Antti, Karri, Timo, Ahonen, Toni, Valkokari, Pasi and Baglee, David (2016) Decision Making Situations Define Data Requirements in Fleet Asset Management. In: 10th World Congress on Engineering Asset Management – WCEAM 2015, 28-30 Sep 2015, Tampere, Finland.

Knowles, Michael (2013) Vehicle telemetry. In: Presentation - Institute of Engineering and Technology (IET), 26 Nov 2013, EDF Visitor Centre, Somerset and West Wiltshire.

Knowles, Michael (2008) The hybrid integration of perceptual symbol systems and interactive reinforcement learning. In: 8th International Conference on Hybrid Intelligent Systems; HIS 2008, 10-12 Sep 2008, Technical University of Catalonia, Barcelona, Spain.

Knowles, Michael and Baglee, David (2011) Asset Management for Hydrogen Fuel Cells. In: COMADEM 2011: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, 30 May-1 Jun 2011, Stavangar, Norway.

Knowles, Michael and Baglee, David (2010) Modelling the properties of oil with various contaminants. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 Jun 2010, Ettington Chase Hotel, Stratford-upon-Avon, UK. (Unpublished)

Knowles, Michael, Baglee, David, Carroll, Steve, Walsh, Chris, Carter, Rebecca and Cruden, Andrew (2011) Analysis of the Efficiency of Electric Vehicle Rapid Charge Systems. In: Hybrid and Electric Vehicle Conference (HEVC) 2011, 18-19 May 2011, Warwick UK.

Knowles, Michael, Ren, Qinglian and Baglee, David (2010) The State of the Art in Fuel Cell Condition Monitoring and Maintenance. In: 25th World Electric Vehicle Symposium and Exposition, 5-9 Nov 2010, Shenzhen, China. (Unpublished)

Kok, Dirk, Knowles, Michael and Morris, Adrian (2012) Building a Driving Simulator as an Electric Vehicle Hardware Development Tool. In: Driving Simulation Conference 2012, 6-7 September 2012, Paris.

Kok, Theodorus, Morris, Adrian, Baglee, David and O'Brien, Roger (2015) Development of a low cost mixed fuel hydrogen/petrol system for reducing vehicle emissions. In: European Battery, Hybrid and Fuel Cell Electric Vehicle Congress, 2-4 Dec 2015, Brussels. (Unpublished)

Kok, Theodorus, Morris, Adrian, Scott, Helen and Baglee, David (2015) The Use of Markov Chain Analysis for Rule-Based Power and Energy Management Optimisation in Electric Vehicles. In: European Battery, Hybrid and Fuel Cell Electric Vehicle Congress, 2-4 Dec 2015, Brussels, Belgium.

Martorana, B., Elmarakbi, Ahmed, Veca, A., Fondacaro, D. and Lambertini, V. (2015) Graphene-based Materials: Opportunities for Multifunctional Lightweight Structures in Automotive Sector. In: NanotechITALY 2015, 25-27 Nov 2015, Bologna, Italy.

Middleton, Helen (2008) Age-related driving behaviour: implications for driver training. In: 2nd International Conference for Driving Instructors and Traffic Experts, 08-09 Oct 2008, Balatonvilagos, Hungary. (Unpublished)

Middleton, Helen, Breker, S.M., Henriksson, P, Rothermel, S and Falkmer, T (2003) The Situation of Aging Drivers: What Older Persons Tell Us and Accident Data Reveal. In: 5th IAG European Regional Congress of Gerontology, 2-5 Jul 2003, Barcelona, Spain. (Unpublished)

Middleton, Helen and Hall, Lynne (2011) Designing for the First Time Buyer: Under 30's Expectations of Electric Vehicle Design. In: Hybrid and Electric Vehicle Conference (HEVC) 2011, 18-19 May 2011, University of Warwick, Warwick, United Kingdom. (Unpublished)

Middleton, Helen, Hall, Lynne, Hall, Marc and Morris, Adrian (2010) A Study into Drivers Perspective of Visual Comfort for Electric Vehicles. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition,, 5-9 Nov 2010, Shenzhen, China.

Middleton, Helen, Litchfield, D and Westwood, Diane (2006) Driving performance and gaze behaviour of younger and older drivers at a simulated junction. In: 26th International Congress of Applied Psychology, 16-21 Jul 2006, Athens, Greece. (Unpublished)

Middleton, Helen and Underwood, G (2006) Predicting Accident Liability in Young Drivers Over the First Four Years of Driving. In: 26th International Congress of Applied Psychology, 16-21 Jul 2006, Athens, Greece. (Unpublished)

Mollon, V, Bonhomme, Jorge, Elmarakbi, Ahmed, Argulles, A and Vina, J (2012) Numerical Analysis of Delamination Growth in Composite Materials using Two Step Extension and Cohesive Zone Methods. In: 15th European Conference on Composite Materials (ECCM15), 24 -28 June 2012, Venice, Italy.

O'Brien, Roger, Veldsman, W. and Elmarakbi, Ahmed (2014) The Development of an Industrial Robotic Low Stress No Distortion (LSND) Welding System. In: International Institute of Welding – International Congress (IIW-IC-2014), 9-11 Apr 2014, New Delhi, India.

Ren, Qinglian, Crolla, Dave and Morris, Adrian (2009) Effect of geared transmissions on electric vehicle drivetrains. In: ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 30 Aug – 02 Sep 2009, San Diego, California, USA.

Ren, Qinglian, Elmarakbi, Ahmed and Trimble, Robert (2013) Analysis of 3 and 4 Branch Epicyclic Transmission Systems for Hybrid Electrical Vehicles using Matrix Method and TSA Tool. In: 2013 IEEE Intelligent Vehicles Symposium, 23-26 June 2013, Gold Coast City, Australia.

Rengaraj, Chandrasekaran, Adgar, Adam and Crolla, Dave (2008) Improvements in Vehicle Handling through the Integration of Active Steering, Active Suspension and Electronic Stability Control. In: Proceedings of 9th International Symposium on Advanced Vehicle Control, AVEC ' 08, 6-9 Oct 2008, Kobe International Conference Center, Kobe, Japan.

Ridley, Ian and Hutchinson, K (2002) Designing Marine Vehicles for Environmental Sustainability: Including Life Cycle Drivers During Concept Design. In: ENSUS 2002 - Marine Science and Technology for Environmental Sustainability Conference, 16-18 Dec 2002, Newcastle University, Newcastle-upon-Tyne, UK.

Ridley, Ian and Hutchinson, K (2004) Life Cycle Cost Drivers for Marine Vehicle Concept Design. In: Whole Life Costing for Defence 2004, 2004, IQPC, London. (Unpublished)

Robson, Kenneth (2010) Linking Maintenance and Manufacturing Strategy: A New Audit Tool. In: IMC-2010 25th International Maintenance Conference OPS-2010 Operations Performance Summit, 8 - 11 November 2010, Bonita Springs, USA.

Serry, M., Abdel-Nasser, S., Sakr, M. and Elmarakbi, Ahmed (2016) Nanostructured Conducting Polymer-Graphene Composite for Energy Conversion Applications. In: 2nd International Conference on Advanced Functional Materials (AFM2016), 8-11 Aug 2016, Jeju, South Korea. (Unpublished)

Sheikh, Muhammad, Elmarakbi, Ahmed, David, B. and Michael, M. (2016) Heat Generation Estimation in Electric Vehicle Battery under Mechanical Load Condition. In: FISITA 2016 World Automotive Congress, 26-30 Sep 2016, Busan, South Korea. (Unpublished)

Sheikh, Muhammad, Elmarakbi, Ahmed and Rehman, Sheikh (2017) Thermal and Electrical failure analysis of lithium-ion battery after crash. In: 2nd International Electrical Engineering Conference (IEEC 2017), 19 - 20 May 2017, IEP Centre, Karachi, Pakistan.

Simon, Victor, Baglee, David, Garfield, Sheila and Galar, Diego (2014) The Development of an Advanced Maintenance training programme utilizing Augmented Reality. In: Comadem 2014 - Implications of life cycle analysis in asset and maintenance management, 16-18 Sep 2014, Brisbane Convention and Exhibition Centre, Australia. (Unpublished)

Stradling, S, Broughton, P, Burgess, C, Fylan, F and Scott, Helen (2011) Diversion from prosecution courses: retuning the crash magnets. In: Road Safety Great Britain Annual Conference 2011, 15-16 Nov 2011, Chester.

Wheatley, Alan (2009) Low cost carbon fibre for automotive applications. In: International Energy Agency (IEA) Advanced Materials for Transportation Applications (AMT) Technical Symposium, 11 Jun 2009, IEA Headquarters, Paris, France. (Unpublished)

Wheatley, Alan and Warren, C David (2008) FreedomCAR and low cost carbon fibre for automotive applications. In: Low carbon generation conference, 7 Feb 2008, Bracknell, UK. (Unpublished)

Wheatley, Alan and Warren, M (2010) The need for a global standards system for the production of carbon fibre. In: Global outlook for carbon fibre conference, 29-30 September 2010, Valencia, Spain. (Unpublished)

elkady, M, Elmarakbi, Ahmed and MacIntyre, John (2012) Modelling Dynamics Control Systems to Improve Crash Characteristics and Occupant Behaviour. In: International Crashworthiness Conference (ICRASH2012), 18-20 July 2012, Milan, Italy. (Submitted)

Book

Elmarakbi, Ahmed (2013) Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness. Wiley. ISBN 978-1-118-42386-8

Thesis

Elkady, Mustafa (2012) Enhancement of Vehicle Crash and Occupant Safety: A New Integrated Vehicle Dynamics Control Systems/Front - End Structure Mathematical Model. Doctoral thesis, University of Sunderland.

Kok, Theodorus Antonius Hendrik (2015) Development of a Strategy for the Management and Control of Multiple Energy Sources within Series Hybrid Electric Vehicles. Doctoral thesis, University of Sunderland.

Ren, Qinglian (2010) Numerical Analysis and Modelling of Transmission Systems for Hybrid Electric Vehicles and Electric Vehicles. Doctoral thesis, University of Sunderland.

Rengaraj, Chandrasekaran (2012) Integration of Active Chassis Control Systems for Improved Vehicle Handling Performance. Doctoral thesis, University of Sunderland.