SURE

Article

A. Mehrabi, Hamid and Usher, Peter (2020) Energy Audit and Cost Saving in an Aluminum Sand Casting Foundry. Journal of Environmental Friendly Materials, 4 (2). pp. 47-51.

Abubakar, Ismail, Ahmad Mehrabi, Hamid and Morton, Reg (2020) Classifying Turbomachinery Blade Mode Shapes Using Artificial Neural Networks. International Journal of Mechanical and Mechatronics Engineering, 14 (8). pp. 300-303.

Abubakar, Ismail, Myler, Peter and Zhou, Erping (2016) Constitutive Modelling of Elastomeric Seal Material under Compressive Loading. Modeling and Numerical Simulation of Material Science.

Adgar, Adam, Cox, Chris, Schwarz, Michael and Moat, Kevin (2001) Classical, fuzzy and genetic algorithm tuning methods for PID controllers: A comparison study using an industrial flow loop. Journal A, 42 (3). pp. 39-44. ISSN 07711107

Ahmad Mehrabi, Hamid and Bowman, Jeremy (1997) Electrofusion Welding of Cross-Linked Polyethylene Pipes. Iranian Polymer Journal, 6 (3). pp. 195-203. ISSN 1026-1265

Ahmad Mehrabi, Hamid and Mintz, Barry (1997) Influence of tempering on impact behaviour of quenched and tempered steels with low hardenability. Materials Science and Technology, 13 (12). pp. 997-1006. ISSN 12

Ahmad Mehrabi, Hamid, Salonitis, Konstantinos and Jolly, Mark (2016) The challenges for energy efficient casting processes. Procedia CIRP, 40. pp. 24-29. ISSN 2212-8271

Armsrong, Mark, Ahmad Mehrabi, Hamid and Naveed, Nida (2022) An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes, 84. pp. 1001-1029. ISSN 1526-6125

Armstrong, Mark, Ahmad Mehrabi, Hamid, Naveed, Nida and Gregg, Carl (2023) Evaluating energy consumption in atomic diffusion additive manufacturing versus sand casting. Journal of Engineering and Technological Advances (JETA), 8 (1). pp. 46-65. ISSN 2811-4280

Armstrong, Mark, Hamid, Mehrabi and Naveed, Nida (2022) An overview of modern metal additive manufacturing technology. Journal of Manufacturing Processes, 84. pp. 1001-1029. ISSN 1526-6125

Atkinson, Callum, Naveed, Nida, Haq, Mir Irfan Ul and Ahmad Mehrabi, Hamid (2022) High Cyclic Fatigue Behaviour of Varied Pitch Compression Springs for Automotive Applications. Journal of Robotics and Mechanical Engineering, 1 (1). ISSN 2770-4122

Azoti, Wiyao, Bonfoh, N., Koutsawa, Y., Belouettar, S. and Lipinski, P. (2013) Influence of auxeticity of reinforcements on the overall properties of viscoelastic composite materials. Mechanics of Materials, 61. pp. 28-38. ISSN 0167-6636

Azoti, Wiyao, Koutsawa, Y., Bonfoh, N., Lipinski, P. and Belouettar, S. (2013) Analytical modeling of multilayered dynamic sandwich composites embedded with auxetic layers. Engineering Structures, 57. 248 - 253. ISSN 0141-0296

Azoti, Wiyao, Koutsawa, Y., Bonfoh, N., Lipinski, P. and Belouettar, S. (2011) On the capability of micromechanics models to capture the auxetic behavior of fibers/particles reinforced composite materials. Composite Structures, 94 (1). 156 - 165. ISSN 0263-8223

Azoti, Wiyao, Koutsawa, Yao, Tchalla, Adjovi, Makradi, Ahmed and Belouettar, Salim (2015) Micromechanics-based multi-site modeling of elastoplastic behavior of composite materials. International Journal of Solids and Structures, 59. pp. 198-207. ISSN 0020-7683

Azoti, Wiyao, Tchalla, A., Koutsawa, Y., Makradi, A., Rauchs, G., Belouettar, S. and Zahrouni, H. (2013) Mean-field constitutive modeling of elasto-plastic composites using two (2) incremental formulations. Composite Structures, 105. pp. 256-262. ISSN 0263-8223

Baglee, David and Knowles, Michael (2013) Maintenance Strategy Development in the UK Food and Drink Industry. International Journal of Strategic Engineering Asset Management, 1 (3). pp. 289-230. ISSN 1759-9733

Baglee, David and Knowles, Michael (2010) Maintenance strategy development within SMEs: the development of an integrated approach. Control and Cybernetics, 39 (1). pp. 275-304. ISSN 0324-8569

Baglee, David, Scott, Helen, Potts, Rita and O'Brien, Roger (2020) An Investigation of Acceptance and E-Readiness for the Application of Virtual Reality and Augmented Reality Technologies to Maintenance Training in the Manufacturing Industry. International Journal of Mechatronics and Manufacturing Systems, 13 (1). pp. 39-58. ISSN 1753-1047

Belai, Igor, Huba, Mikulas, Burn, Kevin and Cox, Chris (2019) PID and filtered PID control design with application to a positional servo drive. Kybernetika, 55 (3). pp. 540-560. ISSN 1805-949X

Burn, Kevin, Robinson, Evan and Dixon, Derek (2014) Introducing fundamental concepts of control: A case study in robot force control. International Journal of Mechanical Engineering Education, 42 (4). pp. 320-339. ISSN 2050-4586

Cossey, Dwane E, Hodge, Stephen A and Karagiannidis, Panagiotis (2023) New nanocomposites based on poly(benzoxazine-co-epoxy) matrix reinforced by novel graphene single and mixed blend fillers. Journal of Reinforced Plastics and Composites. pp. 1-23. ISSN 1530-7964

Daungkumsawat, Jusmin, Okhawilai, Manunya, Charoensuk, Krittapas, Prastowo, Radhitya Banuaji, Jubsilp, Chanchira, Karagiannidis, Panagiotis and Rimdusit, Sarawut (2020) Development of Lightweight and High-Performance Ballistic Helmet Based on Poly(Benzoxazine-co-Urethane) Matrix Reinforced with Aramid Fabric and Multi-Walled Carbon Nanotubes. Polymers, 12 (21). ISSN 2073-4360

Ehyaei, M A, Baloochzadeh, Simin, Ahmadi, A and Abanades, Stéphane (2021) Energy, exergy, economic, exergoenvironmental, and environmental analyses of a multigeneration system to produce electricity, cooling, potable water, hydrogen and sodium-hypochlorite. Desalination, 501. ISSN 0011-9164

Elhazmiri, Badr, Naveed, Nida, Anwar, Naveed and Ul Haq, Mir Irfan (2022) The role of additive manufacturing in industry 4.0: An exploration of different business models. Sustainable Operations and Computers, 3. pp. 317-329. ISSN 2666-4127

Elmarakbi, Ahmed, Karagiannidis, Panagiotis, Ciappa, Alessandra, Innocente, Franco, Galise, Francesco, Martorana, Brunetto, Bertocchi, Francesco, Cristiano, Francesco, Villaro Ábalos, Elvira and Gómez, Julio (2019) 3-Phase Hierarchical Graphene-based Epoxy Nanocomposite Laminates for Automotive Applications. Journal of Materials Science & Technology, 35 (10). pp. 2169-2177. ISSN 1005-0302

Esfandi, Saeed, Baloochzadeh, Simin, Asayesh, Mohammad, Ehyaei, Medhi Ali, Ahmadi, Abolfazl, Rabanian, Amir Arsalan, Costa, Vitor A.F. and Davarpanah, Afshin (2020) Energy, Exergy, Economic, and Exergoenvironmental Analyses of a Novel Hybrid System to Produce Electricity, Cooling, and Syngas. Energies, 13 (23). ISSN 1996-1073

Fakiridis, Spyridon, Hodge, Stephen A. and Karagiannidis, Panagiotis (2023) Thermal Interface Materials with Hexagonal Boron Nitride and Graphene Fillers in PDMS Matrix: Thermal and Mechanical Properties. Energies, 16 (6). pp. 1-17. ISSN 1996-1073

Farooq, Sheikh Aamir, Mukhtar, Sheikh Haris, Raina, Ankush, Ul Haq, Mir Irfan, Md Irfanul, Haque Siddiqui4, Naveed, Nida and Dan, Dobrota (2024) Effect of TiB2 on the Mechanical and Tribological Properties of Marine Grade Aluminum Alloy 5052: An Experimental Investigation. Journal of Materials Research and Technology, 29. pp. 3749-3758. ISSN 2214-0697

Fasuludeen Kunju, Firoz khan, Naveed, Nida, Anwar, Muhammad Naveed and Haq, Mir Irfan Ul (2021) Production and Maintenance in Industries: Impact of Industry 4.0. Industrial Robot. ISSN 0143-991x

Gandy, Elizabeth, Bondi, Anne, Pigott, Timothy M. C., Smith, Gary and Mcdonald, Sharon (2018) Investigation of the use of inertial sensing equipment for the measurement of hip flexion and pelvic rotation in horse riders. Comparative Exercise Physiology, 14 (2). pp. 99-110. ISSN 1755-2540

Gopi, S and Mohan, Dhanesh G (2024) Microhardness and corrosion properties of friction stir welded phosphor bronze. The Paton Welding Journal, 2. ISSN 0957-798X

Gopi, S, Mohan, Dhanesh G and Natarajan, Elango (2023) Mechanical and Corrosion Properties of Friction Stir Welded and Tungsten Inert Gas Welded Phosphor Bronze. Advances in Materials Science. ISSN 2083-4799

Haishang, Wu, Ahmad Mehrabi, Hamid, Naveed, Nida and Karagiannidis, Panagiotis (2022) A Business Model for Additive Manufacturing of Recycled Plastics towards Sustainability. The International Journal of Advanced Manufacturing Technology. ISSN 1433-3015

Hassani, Vahid (2020) An Investigation of Additive Manufacturing Technologies for Development of End-Use Components: A Case Study. International Journal of Pressure Vessels and Piping, 187 (104171). ISSN 0308-0161

Hassani, Vahid, Khabazi, Zubin, Ahmad Mehrabi, Hamid, Gregg, Carl and O'Brien, Roger (2020) Rationalization Algorithm for a Topologically-Optimized Multi-Branch Node for Manufacturing by Metal Printing. Building Engineering, 29. ISSN 2352-7102

Hassani, Vahid, Khabazi, Zubin, Raspall, Felix, Banon, Carlos and Rosen, David (2019) Form-Finding and Structural Shape Optimization of the Metal 3D-Printed Multi-Branch Node with Complex Geometry. Computer-Aided Design and Applications, 17 (1). pp. 205-225.

Hassani, Vahid, Morris, Adrian, Ibrahim, Zunaidi, Abubakar, Ismail, Ahmad Mehrabi, Hamid and O'Brien, Roger (2020) A Mathematical Model for A Cladding Fastener to Estimate the Maximum Pull-Out Force Capacity. Journal of Physics: Conference Series, 1529 (052053). pp. 1-8. ISSN 1742-6588

Hossain, Mohammad Sayeed, Al Harthy, Tariq, Naveed, Nida and Garza, Carlos (2024) Development of accurate contour residual stress measurement technique for sustainable structural integrity assessment in additive manufacturing. Journal of Physics: Conference series, 2811 (012033). ISSN 1742-6596

Hu, Ning, Zemba, Y, Fukunaga, Hisao, Wang, H and Elmarakbi, Ahmed (2007) Stable numerical simulations of propagations of complex damages in composite structures under transverse loads. Composites Science and Technology, 67 (3-4). pp. 752-765. ISSN 0266-3538

Hu, Ning, Zemba, Y, Okabe, T, Yan, C, Fukunaga, Hisao and Elmarakbi, Ahmed (2008) A new cohesive model for simulating delamination propagation in composite laminates under transverse loads. Mechanics of Materials, 40 (11). pp. 920-935. ISSN 0167-6636

Ituarte, Inigo Flores, Boddeti, Narasimha, Hassani, Vahid, Dunn, Martin L. and Rosen, David W. (2019) Design and Additive Manufacture of Functionally Graded Structures based on Digital Materials. Additive Manufacturing, 30 (100839). pp. 1-14. ISSN 2214-8604

Jamnongpak, Weerapong, Tiptipakorn, Sunan, Arumugam, Hariharan, Charoensuk, Krittapas, Karagiannidis, Panagiotis and Rimdusit, Sarawut (2023) Development of NIR light-responsive shape memory composites based on bio-benzoxazine/bio-urethane copolymers reinforced with graphene. Nanoscale Advances. ISSN 2516-0230

Javadi, Y, Smith, MC, Abburi Venkata, K, Naveed, Nida, Forsey, AN, Francis, JA, Ainsworth, RA, Trueman, CE, Smith, DJ, Hosseinzadeh, F, Gungor, S, Bouchard, PJ, Dey, HC, Bhaduri, AK and Mahadevan, S (2017) Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91. International Journal of Pressure Vessels and Piping, 154. pp. 41-57. ISSN 0308-0161

Jiang, Jing, Sun, Hongjian, Baglee, David and Vincent Poor, H (2016) Achieving Autonomous Compressive Spectrum Sensing for Cognitive Radios. IEEE Transactions on Vehicular Technology, 65 (3). pp. 1281-1291. ISSN 0018-9545

Karagiannidis, Panagiotis, Hodge, Stephen A., Lombardi, Lucia, Tomarchio, Flavia, Decorde, Nicolas, Milana, Silvia, Goykhman, Ilya, Su, Yang, Mesite, Steven V., Johnstone, Duncan N., Leary, Rowan K., Midgley, Paul A., Pugno, Nicola M., Torrisi, Felice and Ferrari, Andrea C. (2017) Microfluidization of Graphite and Formulation of Graphene-Based Conductive Inks. ACS Nano, 11 (3). pp. 2742-2755. ISSN 1936-0851

Khaled, M, Ramadan, M, Elmarakbi, Ahmed and Fourment, L (2015) Simulation of Incremental Forming Processes Using a Thermo-Mechanical Partitioned Algorithm. Key Engineering Materials, 651. pp. 1331-1336. ISSN 1013-9826

Khaled, M, Ramadan, M, Elmarakbi, Ahmed, Harambat, F and Peerhossaini, H (2014) The Underhood Aerothermal Management of Leakage Zones - Temperature Measurements. WIT Transactions on Engineering Sciences, 83. pp. 303-311. ISSN 1746-4471

Khan, Salman, Khadija, Khadija, Junaid, Massab, Shehbaz, Tauheed, Khan, Fahd Nawaz and Naveed, Nida (2024) Evaluation of nano indentation behavior of TIG, MIG and diffusion bonded Inconel 718 and austenitic Stainless Steel 316L joint interface. Materials Letters, 371. ISSN 0167-577X

Khatib, S A, Naveed, Nida and Anwar, N (2020) The Study of Diverse Personalities that Hinder Harmony across Engineering Team. Journal of Biogeneric Science and Research, 5 (1). pp. 1-11. ISSN 2692-1081

Kinnunen, Sini-Kaisu, Yla-Kujala, Antti, Marttonen-Arola, Salla, Karri, Timo and Baglee, David (2018) Internet of Things in Asset Management: Insights from Industrial Professionals and Academia. International Journal of Service Science, Management, Engineering, and Technology, 9 (2). pp. 1-16. ISSN 1947-959X

Knowles, Michael and Baglee, David (2012) The role of maintenance in energy saving in commercial refrigeration. Journal of Quality in Maintenance Engineering, 18 (3). pp. 282-294. ISSN 1355-2511

Koutsawa, Yao, Azoti, Wiyao, Belouettar, Salim, Martin, Rodolphe and Barkanov, Evgeny (2012) Loss behavior of viscoelastic sandwich structures: A statistical-continuum multi-scale approach. Composite Structures, 94 (4). 1391 - 1397. ISSN 0263-8223

Longsiri, Krittaphorn, Mora, Phattarin, Peeksuntiye, Watcharapong, Jubsilp, Chanchira, Hemvichian, Kasinee, Karagiannidis, Panagiotis and Rimdusit, Sarawut (2022) Ultrafine fully vulcanized natural rubber modified by graft‑copolymerization with styrene and acrylonitrile monomers. Bioresources and Bioprocessing.

Marttonen-Arola, Salla and Baglee, David (2019) Assessing the information waste in maintenance management processes. Journal of Quality in Maintenance Engineering, 26 (3). pp. 383-398. ISSN 1355-2511

Mateo, David, Horsevad, Nicolaj, Hassani, Vahid, Chamanbaz, Mohammadreza and Bouffanais, Roland (2019) Optimal Network Topology for Responsive Collective Behavior. Science Advances, 5 (4). pp. 1-10. ISSN 2375-2548

Mohan, Dhanesh G (2024) Multiobjective Optimization of Hard Turning on OHNS Steel Using Desirability and TOPSIS Approaches. Advances in Materials Science and Engineering, 2024 (992106). ISSN 1687-8434

Mohan, Dhanesh G, Palanikumar, K, Natarajan, Elango, Suresh, S, Prakash, Chander and Kaur, Kirtanjot (2024) Prospects of friction stir processed Mg alloys and composites-Reviews and suggestions. Journal of Materials Research and Technology, 31. pp. 971-997. ISSN 2238-7854

Mollon, V, Bonhomme, Jorge, Elmarakbi, Ahmed, Arguelles, A. and Vina, J (2012) Finite element modelling of mode I delamination specimens by means of implicit and explicit solvers. Polymer Testing, 31 (3). pp. 404-410. ISSN 0142-9418

Mora, Phattarin, Rimdusit, Sarawut, Karagiannidis, Panagiotis, Srisorrachatr, Ukrit and Jubsilp, Chanchira (2023) Mechanical properties and curing kinetics of bio-based benzoxazine–epoxy copolymer for dental fiber post. Bioresources and Bioprocessing, 10 (1). ISSN 2197-4365

Mora, Phattarin, Rimdusit, Sarawut, Karagiannidis, Panagiotis, Srisorrchart, Ukrit and Jubsilp, Chanchira (2024) Biocompatibility, thermal and mechanical properties of glass fiber-reinforced polybenzoxazine composites as a potential new endodontic post. Polymer Composites. ISSN 0272-8397

Naveed, Nida (2022) Additive manufacturing technologies: industrial and medical applications. Sustainable Operations and Computers.

Naveed, Nida (2021) Characterisation of short-length scale residual stress variations within an Electron Beam Welded P91 Ferritic–Martensitic Steel Plate. Heliyon, 7 (5). e07045. ISSN 2405-8440

Naveed, Nida (2017) Deformation Characterisations for the WEDM Contour Cut Surfaces. International Journal of Robotics and Mechatronics, 4 (1). pp. 22-32. ISSN 2288-5889

Naveed, Nida (2019) Design and Analysis of a Disc Brake Rotor for Optimal Performance in Racing. World Journal of Modelling and Simulation. ISSN 1746-7233

Naveed, Nida (2018) Experimental Study of the Effects of Wire EDM on the Characteristics of Ferritic Steel, At a Micro-Scale on the Contour Cut Surface. Metallurgical Research & Technology, 115 (4). pp. 1-11. ISSN 2271-3646

Naveed, Nida (2020) Guidelines to select suitable parameters for contour method stress measurements. Archives of Mechanics, 72 (1). pp. 39-58. ISSN 0373-2029

Naveed, Nida (2021) Investigating the Material Properties and Microstructural Changes of Fused Filament Fabricated PLA and Tough-PLA Parts. Polymers, 13 (9). p. 1487. ISSN 2073-4360

Naveed, Nida and Anwar, Muhammad Naveed (2024) Optimising 3D Printing Parameters through Experimental Techniques and ANOVA-Based Statistical Analysis. SPE Polymers. ISSN 2690-3857

Naveed, Nida and Whitford, Michael (2019) Design Analysis of Bicycle Brake Disc for Carbon Fibre - Lightweight Material. The International Journal of Integrated Engineering, 11 (8). pp. 91-109. ISSN 2229-838X

Nikkhah, Hamid, Naveed, Nida, Assaedi Beiragh, Roghaiyeh, Dadashzadeh, Sina and Tri Truong, Quang (2022) Crashworthiness investigation of draw bead in Aluminum tubes under axial loading condition. International Journal of Protective Structures (15). pp. 1-15.

Oladapo, Bankole, Ismail, Sikiru, Ikumapayi, Omolayo and Karagiannidis, Panagiotis (2022) Impact of rGO-coated PEEK and lattice on bone implant. Colloids and Surfaces B: Biointerfaces.

Oladapo, Bankole, Kayode, Joseph, Karagiannidis, Panagiotis, Naveed, Nida, Ahmad Mehrabi, Hamid and Ogundipe, Kolawole (2022) Polymeric composites of cubic-octahedron and gyroid lattice for biomimetic dental implants. Materials Chemistry and Physics, 289. ISSN 0254-0584

Paniliyappan, Sabrinathan, Sivakumar, Narain Kumar, Rajakumar, S and Mohan, Dhanesh G (2024) Ultrasonic welding of Cork Wood/PLA composites: effect of welding factors on lap shear strength performance. Journal of Adhesion Science and Technology. pp. 1-20. ISSN 0169-4243

Panmanee, Phanutchanart, Okhawilai, Manunya, Mora, Phattarin, Jubsilp, Chanchira, Karagiannidis, Panagiotis and Rimdusit, Sarawut (2022) Development of a new birthing model material based on silicone rubber/ natural rubber blend. Polymer Testing.

Pourahmad, P, Abbasi, Mehrdad and Ahmad Mehrabi, Hamid (2012) Bimetal friction stir welding of aluminum to magnesium. Journal of Advanced Materials and Processing, 1 (1).

Rehman, Sheikh, Akram, Sufyan, Kanellopoulos, Antonios, Elmarakbi, Ahmed and Karagiannidis, Panagiotis (2020) Development of new graphene/epoxy nanocomposites and study of cure kinetics, thermal and mechanical properties. Thermochimica Acta. ISSN 0040-6031

Rehman, Sheikh, Gomez, Julio, Villaro, Elvira, Cossey, Dwane and Karagiannidis, Panagiotis (2022) Bio-Based Epoxy/Amine Reinforced with Reduced Graphene Oxide (rGO) or GLYMO-rGO: Study of Curing Kinetics, Mechanical Properties, Lamination and Bonding Performance. Nanomaterials. ISSN 2079-4991

Rimdusit, Niratchaporn, Jubsilp, Chanchira, Mora, Phattarin, Hemvichian, Kasinee, Thuy, Tran Thi, Karagiannidis, Panagiotis and Rimdusit, Sarawut (2021) Radiation graft-copolymerization of ultrafine fully vulcanized powdered natural rubber: Effects of styrene and acrylonitrile contents on thermal stability. Polymers. ISSN 2073-4360 (In Press)

Rouf, Saquib, Malik, Abrar, Raina, Ankush, Haq, Mir Irfan Ul, Naveed, Nida, Zolfagharian, Ali and Bodaghi, Mahdi (2022) Functionally Graded Additive Manufacturing for Orthopedic applications. Journal of Orthopaedics, 33 (11). pp. 70-80.

Rouf, Saquib, Raina, Ankush, Ul Haq, Mir Irfan and Naveed, Nida (2021) Sensors and Tribological Systems: Applications for Industry 4.0. Industrial Robot. ISSN 0143-991x

Rouf, Saquib, Raina, Ankush, Ul Haq, Mir Irfan, Naveed, Nida, Jeganmohan, Sudhanraj and Farzana Kichloo, Aysha (2022) 3D Printed Parts and Mechanical Properties: Influencing Parameters, Sustainability Aspects, Global Market Scenario, Challenges and Applications. Advanced Industrial and Engineering Polymer Research.

Ruenpanya, Kullanard, Mora, Phattarin, Karagiannidis, Panagiotis, Bunyanuwat, Kittipon and Rimdusit, Sarawut (2024) Magnetic-Responsive Triple Shape Memory Polymer from Bio-Based Benzoxazine/Urethane Polymer Alloys with Iron Oxide Nanoparticles. Advanced Industrial and Engineering Polymer Research. ISSN 2542-5048 (In Press)

Salleh, Muhammad Zulhaziman, Morgan, Mohamed Almoghazy, Hamid, Izni Atikah Abd, Jamaluddin, Mohd Faizan, Hizaddin, Hanee Farzana, Hayyan, Adeeb and Karagiannidis, Panagiotis (2023) Analysis of Ternary LLE Data on Increasing Limonene Solubility in Water using Alcohol as Cosolvent. AIP Conference Proceedings, 2847 (1). ISSN 0094-243X

Singh, Sarbjeet, Baglee, David, Galar, Diego and Bjorling, Sten-Erik (2014) Self-maintenance techniques: a smart approach towards self-maintenance system. International Journal of Systems Assurance Engineering and Management, 5 (1). pp. 75-83. ISSN 0975-6809

Singh, Sarbjeet, Baglee, David, Knowles, Michael and Galar, Diego (2014) Developing RCM strategy for wind turbines utilizing e-condition monitoring. International Journal Systems Assurance Engineering Management, 5 (18). ISSN 0976-4348

Suresh, S, Natarajan, Elango, Mohan, Dhanesh G, Ang, Chung Kit and Sudhagar, S (2024) Depriving friction stir weld defects in dissimilar aluminum lap joints. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Tai, Vin Cent, Kai-Seun, Joseph Wu, Baglee, David, Mathew, Prasath Reuben, Moey, Lip Kean and Cheng, Xinwei (2022) Investigation of varying louver angles and positions on cross ventilation in a generic isolated building using CFD simulation. Journal of Wind Engineering & Industrial Aerodynamics, Volume. pp. 1-20. ISSN 229 (2022) 105172

Tchalla, A., Azoti, Wiyao, Koutsawa, Y., Makradi, A., Belouettar, S. and Zahrouni, H. (2015) Incremental mean-fields micromechanics scheme for non-linear response of ductile damaged composite materials. Composites Part B: Engineering, 69. 169 - 180. ISSN 1359-8368

Wooley, Robert, Timmis, Jonathan and Tyrrell, A.M. (2021) Cylindabot: Transformable Wheg Robot Traversing Stepped and Sloped Environments. Robotics, 10 (3). ISSN 2218-6581

Wu, Haishang, Ahmad Mehrabi, Hamid, Naveed, Nida and Karagiannidis, Panagiotis (2022) Impact of strategic control and supply chain management on recycled plastic additive manufacturing. Journal of Cleaner Production, 364. ISSN 0959-6526

Xiaohui, Fua, Vin Cent, Taib, Lip Kean, Moey, Nor Faiza Abd, Rahmand, Kamarul Arifin, Ahmad and Baglee, David (2024) Opening configurations and natural cross ventilation performance in a double-loaded multi-level apartment building: A CFD analysis. Building and Environment, 254. ISSN 0360-1323

Yau, Alan and Baglee, David (2010) The Development of a Mobile e-maintenance system utilizing RFID and PDA Technologies. Engineering Asset Lifecycle Management, 2010. pp. 679-687. ISSN 978-0-85729-321-3

Zunaidi, Ibrahim (2019) Parameter Settings for an Automated Gantry-Robot Painting System using a 3-Gun Atomization Spray Method for an Anti- Static Coating Process. American Journal of Engineering and Applied Sciences, 12 (4). ISSN 1941-7039

salemi. G, Ali and Ahmad Mehrabi, Hamid (2016) Synthesis and characterization of silica mesoporous material produced by hydrothermal continues pH adjusting path way. Materials International, 26 (4). pp. 411-414. ISSN 1002-0071

Book Section

Adgar, Adam and Baglee, David (2008) Analysis of the skills gap and training requirements within the maintenance function. In: Proceedings of CM2008/MFPT2008. Coxmoor Publishing Company. ISBN 9781901892314

Ahmad Mehrabi, Hamid, Jolly, Mark and Salonitis, Konstantinos (2016) Road-Mapping towards a Sustainable Lower Energy Foundry. In: Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies (52). Springer. ISBN 9783319320960

Armstrong, Mark, Hamid, Mehrabi and Naveed, Nida (2023) Environmental Impact of Metal Additive Manufacturing. In: 3D Printing and Sustainable Product Development. CRC Press, Taylor and Francis, Boca Raton, pp. 61-86. ISBN 9781003306238

Baglee, David (2010) A New Integrated E-maintenance Concept. In: E-Maintenance. Springer, pp. 61-82. ISBN 978-1-84996-204-9

Baglee, David, Knowles, Michael and Yau, Alan (2011) Development of techniques to manage asset condition using new tools. In: Asset Management: The State of the Art in Europe from a Life Cycle Perspective. Production & Process Engineering . Springer, pp. 143-154. ISBN 9789400727236

Campos, Jamie, Jantunen, Erkki, Baglee, David, Gilabert, Eduardo, Fumagali, Luca and Emmanouilidis, Christos (2016) The Use of Mobile Technologies and Their Economic Benefits in Maintenance. In: Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Springer International Publishing, Springer International Publishing Switzerland, pp. 69-71. ISBN 978-3-319-27062-3

Dixon, Derek and Baglee, David (2023) Technology and the future of maintenance. In: International Congress and Workshop on Industrial AI and eMaintenance 2023. Lecture Notes in Mechanical Engineering . Springer, pp. 751-762. ISBN ISBN 978-3-031-39618-2

Elmarakbi, Ahmed (2011) Finite element analysis of delamination growth in composite materials using LS-DYNA: Formulation and implementation of new cohesive elements. In: Advances in composite materials-ecodesign and analysis. InTech, pp. 409-428. ISBN 978-953-307-468-9

Gupta, Vivudh, Singh, Pawandeep and Naveed, Nida (2023) Epoxy based Nanocomposites: Tribological Characteristics and Challenges. In: Nanomaterials for Sustainable Tribology. CRC Press - Taylor Francis, pp. 1-11. ISBN 9781003306276

Hale, Matthew F., Angus, Mike, Buchanan, Edgar, Li, Wei, Woolley, Robert, Le Goff, Léni K., De Carlo, Matteo, Timmis, Jonathan, Winfield, Alan F., Hart, Emma, Eiben, Agoston E. and Tyrrell, Andy M. (2021) Hardware Design for Autonomous Robot Evolution. In: IEEE Symposium Series on Computational Intelligence. IEEE. ISBN 9781728125473

Jolly, Mark, Salonitis, Konstantinos and Hamid, Mehrabi (2017) Energy Efficiency Status-Quo at UK Foundries: The “Small-Is-Beautiful” Project. In: Light Metals 2017. Springer. ISBN 9783319515410

Kinnunen, Sini-Kaisu, Marttonen-Arola, Salla, Yla-Kujala, Antti, Karri, Timo, Ahonen, Toni, Valkokari, Pasi and Baglee, David (2016) Decision Making Situations Define Data Requirements in Fleet Asset Management. In: Proceedings of the 10th World Congress on Engineering Asset Management (WCEAM 2015). Springer International Publishing Switzerland, pp. 73-76. ISBN 978331927063

Knowles, Michael, Baglee, David and Sharma, Pankaj (2017) Application of Open Source Hardware to the Development of Autonomous Maintenance Support Systems. In: Advances in Through-life Engineering Services. Decision Engineering . Springer, pp. 333-347. ISBN 978-3-319-49937-6

Shaalan, Abdu, Baglee, David and Dixon, Derek (2024) Machine learning model for predictive maintenance of modern manufacturing assets. In: 2024 29th International Conference on Automation and Computing (ICAC). IEEE, pp. 1-6. ISBN 979-8-3503-6088-2

Watkinson, Cate, Joanne, Mitchell and Colin, Rennie (2024) Waterjet and Creative Innovation in Higher Education. In: The History of Waterjet Technology – from raw cutting to precision machining. Jenny Stanford Publishing, USA. (Submitted)

Wheeler, Shirley, Millington, Andrew and Burton, Robert (2004) L'attitude. In: L' attitude. Art Editions North, University of Sunderland, pp. 10-11. ISBN 1 873757 79 4

Wu, Haishang, Naveed, Nida and Hamid, Mehrabi (2023) How 3D-Printing achieves Sustainability. In: 3D-Printing and Sustainable Product Development. CRC Press, Taylor and Francis, pp. 21-37. ISBN 9781003306238

Conference or Workshop Item

Adgar, Adam, Emmanouilidis, Christos and McGarry, Kenneth (1999) Combination of modelling techniques for fault diagnosis of rotating machinery using vibration analysis. In: 12th International Congress on Condition Monitoring and Engineering Management, 6-8 Jul 1999, University of Sunderland.

Ahmad Mehrabi, Hamid, Salonitis, Konstantinos and Jolly, Mark (2016) Sustainable Investment Casting. In: 14th WORLD CONFERENCE IN INVESTMENT CASTING, 17-20 April 2016, Paris, France.

Al Hariri, Mohammad, Gordon, Timothy, Karagiannidis, Panagiotis and Sheikh, Muhammad (2023) Critical Finite Element Analysis of Electric Vehicle’s Front-End to Predict the Kinematics of Tesla-like Battery Pack During High-Speed Full-Frontal Collision with Rigid Barrier. In: FISITA World Congress 2023, 12-14 Sep 2023, Barcelona International Convention Centre.

Armstrong, Mark, Ahmad Mehrabi, Hamid, Naveed, Nida and Gregg, Carl (2022) Comparison Analysis of Energy Consumption of Atomic Diffusion Additive Manufacturing with Sand Casting: Towards a more Sustainable Future. In: International Conference on Sustainable Engineering & Advanced Technology (ICSEAT2022), 16 17 June 2022, SEGi University.

Atkinson, Stephanie (2008) What should the curriculum for Initial Teacher Training (ITT) of a D&T teacher include? One solution & its development over the past 25 years. In: PATT-20: Pupils' Attitudes Towards Technology: Critical Issues in Technology Education, 3-6 Nov 2008, Tel-Aviv, Israel.

Azoti, Wiyao and Koutsawa, Yao (2011) Design space of auxetic composite materials from non-auxetic phases: Case of kinematic integral equation as formal solution of the heterogeneous material problem. In: 4th Conference in the Design, Modeling and Experiments for Advanced Structures and Systems (DeMEASS IV), 27-30 Mar 2011, Urspelt, Luxembourg. (Unpublished)

Azoti, Wiyao, Koutsawa, Yao, Belouettar, Salim, Bonfoh, Napo and Lipinski, Paul (2011) Sur la prédiction micromécanique du comportement auxétique des matériaux composites. In: 20ème congrès français de mécanique (cfm2011)., 29 Aug - 2 Sep 2011, Besancon, France.

Azoti, Wiyao, Koutsawa, Yao, Bonfoh, Napo, Belouettar, Salim and Lioinski, Paul (2010) Exploring avenues to design negative Poisson’s ratio composite materials. In: 7th Solid mechanics Conference (SolMech 2010), 6-10 Sep 2010, Warsaw, Poland.. (Unpublished)

Azoti, Wiyao, Koutsawa, Yao, Bonfoh, Napo, Lipinski, Paul and Belouettar, Salim (2012) Dynamic behavior of multilayered sandwich composite with auxetic layers. In: International conference on Mechanics of Nano, Micro and Macro Composite Structures, 18-20 Jun 2012, Politecnico di Torino, Italy. (Unpublished)

Azoti, Wiyao, Koutsawa, Yao, Tchalla, Adjovi, Makradi, Ahmed and Belouettar, Salim (2013) Constitutive modeling of elasto-plastic composites using a multi-site micromechanics scheme. In: International Conference on Science and Technology of Heterogeneous Materials and Structures (ICSTHMS), 11-13 Oct 2013, Wuhan University, China. (Unpublished)

Azoti, Wiyao, Koutsawa, Yao, Tchalla, Adjovi, Makradi, Ahmed and Belouettar, Salim (2013) Constitutive modeling of elasto-plastic composites using two (2) incremental mean-field formulations. In: 17th International Conference on Composite Structures (ICCS17), 17-21 Jun 2013, FEUP University of Porto, Portugal. (Unpublished)

Baglee, David (2009) The Development of Mobile e-maintenance system utilizing RFID and PDA technologies. In: WCEAM 2009: 4th World Congress on Engineering Asset Management, 28–30 Sep 2009, Athens, Greece. (Unpublished)

Baglee, David (2018) From Small Data to Big Value. In: MRO Talk: Excellence in Maintenance, Reliability & Operations, 11-12 Sep 2018, Berlin, Germany. (Unpublished)

Baglee, David (2017) Improving maintenance and safety through a proactive strategy. In: 19th Annual Ground Handling International Conference, 27-30 Nov 2017, CCIB, Barcelona. (Unpublished)

Baglee, David (2009) An Integrated Approach To Maintenance Strategy Development within SMEs. In: MFPT 2009: 2009 Conference of the Society for Machinery Failure Prevention Technology, 28-30 Apr 2009, Dayton, Ohio, USA. (Unpublished)

Baglee, David and Knowles, Michael (2011) Overcoming logistic issues in asset management of wind turbines. In: COMADEM 2011: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, 30 May-1 Jun 2011, Stavangar, Norway.

Baglee, David and Knowles, Michael (2009) The Role of Maintenance in Energy Saving. In: 19th MIRCE International Symposium on Engineering and Managing Sustainability - A Reliability, Maintainability and Supportability Perspective, 2-3 Dec 2009, Exeter, UK. (Unpublished)

Baglee, David, Knowles, Michael and Morris, Adrian (2013) Optimisation of Food and Engineering Supply Chain Technology (OPTFEST): A Case Study. In: Comadem 2013, 11 - 13 Jun 2013, Helsinki.

Baloochzadeh, Simin (2024) Production of biopolymers from pumpkin shell waste and its effect on filtration and rheological properties of water-based drilling mud- toward sustainable drilling. In: NANOTECH FRANCE 2024 / GAMS 2024 / NANOMATEN 2024 / BIOTECH FRANCE 2024, 05-07 June 2024, Paris - France.

Bjorling, Sten-Erik, Baglee, David, Galar, Diego and Singh, Sarbjeet (2013) Maintenance Knowledge Management with Fusion of CMMS and CM. In: DMIN 2013 International Conference on Data Mining, 22 - 25 Jul 2013, Las Vegas, Nevada, USA.

Caland, J, Silva, A., Henrique, M., Karagiannidis, P and Felix, J (2024) An Efficient Graphite Exfoliation Method Using Magnetic Nanoparticles and Arabic Gum for Synthesis of Superparamagnetic Hybrid Composites Materials. In: Autumn Meeting 2024: Brazilian Physical Society, 19-23 May 2024, Florianopolis, Santa Catarina, Brazil.

Campos, Jaime, Sharma, Pankaj, Albano, Michele, Jantunen, Erikki, Baglee, David and Ferreira, Luis Lino (2019) Arrowhead Framework services for condition monitoring and maintenance based on the open source approach. In: 6th International Conference on Control Decision Information Technologies, 23rd -26th April, Paris. France.

Elmarakbi, Ahmed and Azoti, Wiyao (2015) Novel composite materials for automotive applications: concepts and challenges for energy-efficient and safe vehicles. In: 10th International Conference on Composite Science and Technology, ICCST/10, 2-4 Sep 2015, Instituto Superior Tecnico, Lisboa, Portugal.

Elmarakbi, Ahmed, Hu, Ning and Fukunaga, Hisao (2007) Adaptive rate-dependent interface models: formulation and numerical analysis of progressive delaminatons in composite materials. In: 6th International Conference on Advanced Technology in Experimental Mechanics, 12-14 Sep 2007, Fukuoka, Japan. (Unpublished)

Haishang, Wu, Ahmad Mehrabi, Hamid, Karagiannidis, Panagiotis and Naveed, Nida (2022) Sustainable Manufacturing by Home Based 3D Printing. In: International Conference on Sustainable Engineering & Advanced Technology (ICSEAT2022), 16 17 June 2022, SEGi University.

Hassani, Vahid and William Rosen, David (2019) A Design Method to Exploit Synergies Between Fiber-Reinforce Composites and Additive Manufactured Processes. In: Solid Freeform Fabrication 2019: Proceedings of the 30th Annual International, August 2019, Texas.

Ihemegbulem, ibifuro and Baglee, David (2017) ISO55000 Standard as A Driver for Effective Maintenance Budgeting. In: 2nd International Conference on Maintenance Engineering, IncoME-II 2017, 5-6 Sep 2017, University of Manchester.

Jantunen, Erkki, Arnaiz, Aitor, Baglee, David and Fumagalli, Luca (2014) Identification of wear statistics to determine the need for a new approach to maintenance. In: Euromaintenance 2014, 5 - 8 May 2014, Helsinki Finland. (Submitted)

Jantunen, Erkki, Sharma, Pankaj, Gorostegui, Unai, Baglee, David and Campos, Jaime (2017) Management of Maintenance on an e-Maintenance Platform. In: 2nd International Conference on Maintenance Engineering, IncoME-II 2017, 5-6 Sep 2017, University of Manchester.

Karagiannidis, Panagiotis (2019) Development of graphene-based materials from printing inks and coatings to structural composites. In: Invited Talk: Seminars on Next Generation Materials and Microsystems, 18 October 2019, Department of Engineering, Durham University.

Knowles, Michael and Baglee, David (2011) Advanced Maintenance And Reliability Management For Low Carbon Technologies. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 20 - 22 June 2011, Cardiff, UK.

Knowles, Michael and Baglee, David (2011) Asset Management for Hydrogen Fuel Cells. In: COMADEM 2011: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management, 30 May-1 Jun 2011, Stavangar, Norway.

Knowles, Michael and Baglee, David (2012) Condition Management of Marine Lube Oil and the Role of Intelligent Sensor Systems in Diagnostics. In: COMADEM 2012: 25th International Congress on Condition Monitoring and Diagnostics Engineering Management, 18-20 Jun 2012, Huddersfield, UK.. (Unpublished)

Knowles, Michael and Baglee, David (2011) Condition monitoring in an on-ship environment. In: IMarEST 2nd Condition Based Maintenance Conference, 28-29 Sep 2011, London UK.

Knowles, Michael and Baglee, David (2011) Developing RCM Strategy for Wind Turbines Utilising Online Condition e-Monitoring. In: 6th World Congress on Engineering Asset Management (WCEAM 2011), 2-4 Oct 2011, Cincinnati, Ohio, USA.. (Unpublished)

Koutsawa, Yao, Azoti, Wiyao and Giunta, Gaetano (2013) Effective electro-elastic properties of continuous fibers reinforced multi-functional composites with functionally graded ZnO interphase. In: 6th ECCOMAS Conference on Smart Structures and Materials SMART2013, 24 - 28 Jun 2013, Politecnico di Torino, Italy.

MacIntyre, John, Emmanouilidis, Christos, Adgar, Adam and McGarry, Kenneth (1999) The VISION project: a European collaboration on vibration analysis. In: 12th International Congress on Condition Monitoring and Engineering Management, 6-8 Jul 1999, University of Sunderland.

Mollón, V, Bonhomme, J, Elmarakbi, Ahmed, Vina, J and Arguelles, A. Comparison of numerical and local partition methods in ADCB specimens. In: ICCS18 - 18th International Conference on Composite Structures, 15-18 June 2015, Lisbon, Portugal.

Naqvi, Shenela, Naveed, Nida, Ahmed Siddiqui, Afshan and Afshan, Amber (2021) Sustainable Materials for Engineering Applications. In: 1st International Conference on Advances in Material Sciences and Environmental Engineering, 21-23 June 2021, NED University Of Engineering & Technology, Pakistan.

Naveed, Nida (2023) Effect of Continuous Carbon Fiber Reinforcement on the Tensile Properties of Onyx Components Printed by Fused Deposition Modelling (FDM) Technology. In: 15th International Conference on Materials Processing and Characterization, 05 - 08 Sep 2023, Northumbria University, UK.

Naveed, Nida (2023) Optimising Fused Deposition Modelling (FDM) Parameters for Enhanced Mechanical Properties of 3D Printed Parts. In: The 8th European Congress on 3D Printing and Additive Manufacturing, 02-03 Oct 2023, Amsterdam, Netherlands.

Naveed, Nida (2013) Residual Stress Measurement in a Stainless Steel Clad Ferritic Plate Using the Contour Method. In: ASME 2013 Pressure Vessels and Piping Conference, July 14-18, 2013, Paris, France.

Naveed, Nida (2019) Residual Stress Prediction of an Electron Beam Welded P91 Ferritic–Martensitic Steel Plate using the Contour Method. In: 14th International Conference on Advances in Experimental Mechanics, 10-12 Sep 2019, Belfast, Northern Ireland.

Naveed, Nida (2008) Role of U-shaped anchorages on behaviour of RC beams strengthened by CFRP plates. In: Fourth International Conference on FRP Composites in Civil Engineering (CICE2008), 22-24July 2008, Zurich, Switzerland.

Naveed, Nida (2023) A Study on the Effect of Concentric Fiber Layers on the Mechanical Properties of Onyx Reinforced with Continuous Fiberglass. In: The BSSM’s 17th International Conference on Advances in Experimental Mechanics, 28-30 Aug 2023, University of Glasgow, Glasgow, Scotland.

Naveed, Nida, Hosseinzadeh, F, Kowal, J and Bouchard, PJ (2017) Residual stress characterisation of a dissimilar metal electron beam welded plate using the contour method. In: BSSM 12th International Conference on Advances in Experimental Mechanics, 29th August 2017- 31st August 2017, University of Sheffield, Sheffield, UK.

O'Brien, Roger, Veldsman, W and Elmarakbi, Ahmed (2015) The development of an industrial robotic Low Stress No Distortion (LSND) welding system. In: 68th IIW Annual Assembly & International Conference, 28 Jun - 3 Jul 2015, Helsinki, Finland.

Ridley, Ian, Buxton, I L and Stephenson, G H (1999) The Use of Object Oriented Modelling in Through Life Costing of Shipboard Systems. In: 10th International Conference on Computer Applications in Shipbuilding, 1999, Massachusetts Institute of Technology, USA.

Ridley, Ian and Hutchinson, K (2002) The Consideration of Whole Life Drivers During the Conceptual Design of Marine Artefacts. In: Ship Design and Operation for Environmental Sustainability Conference, 4-5 Sep 2002, The Royal Institution of Naval Architects, London.

Ridley, Ian and Hutchinson, K (2002) Designing Marine Vehicles for Environmental Sustainability: Including Life Cycle Drivers During Concept Design. In: ENSUS 2002 - Marine Science and Technology for Environmental Sustainability Conference, 16-18 Dec 2002, Newcastle University, Newcastle-upon-Tyne, UK.

Ridley, Ian and Hutchinson, K (2004) Life Cycle Cost Drivers for Marine Vehicle Concept Design. In: Whole Life Costing for Defence 2004, 2004, IQPC, London. (Unpublished)

Ridley, Ian, Jaffar, W and Berry, G A (2005) Improving Performance in Container Ports. In: Integrating for Excellence Conference, Jun 2005, Sheffield, UK.

Ridley, Ian, Jaffar, Wafi and Berry, Gordon (2005) Performance Management in Port Authorities. In: Fourth International Conference on Maritime Engineering, Ports and Waterways, Apr 2005.

Ridley, Ian, Reeve, N and Hutchinson, K (2005) Design and Construction of Marine Vehicles for Environmental Sustainability: Adoption and Application of Principles and Techniques by Industry. In: ENSUS 2005: Marine Science and Technology for Environmental Sustainability Conference, Mar 2005, Newcastle University, Newcastle-upon-Tyne, UK. (Unpublished)

Ridley, Ian and Stephenson, G H (1999) Through Life Costing and Manufacturing Decisions. In: Association of Cost Engneers, Cost Management Opportunities in Manufacturing Seminar, 1999, De Montfort University, UK. (Unpublished)

Wheatley, Alan and Warren, C David (2008) FreedomCAR and low cost carbon fibre for automotive applications. In: Low carbon generation conference, 7 Feb 2008, Bracknell, UK. (Unpublished)

Wheatley, Alan and Warren, M (2010) The need for a global standards system for the production of carbon fibre. In: Global outlook for carbon fibre conference, 29-30 September 2010, Valencia, Spain. (Unpublished)

Book

Hassani, Vahid and Khabazi, Zubin (2019) Form-Finding of the Metal 3D-Printed Node with Complex Geometry. LAMBERT Academic Publishing, Germany. ISBN 978-620-0-23681-4

Ul Haq, Mir Irfan, Ankush, Raina and Naveed, Nida (2023) 3D Printing and Sustainable Product Development. CRC Press, Taylor and Francis. ISBN 9781003306238

Thesis

Sheikh, Muhammad (2018) STATE OF CHARGE DEPENDENT THERMAL RUNAWAY DETECTION OF LITHIUM-ION BATTERY UNDER MECHANICAL ABUSE CONDITIONS. Doctoral thesis, University of Sunderland.

Tangwe, Stephen L (2018) Demonstration of residential air source heat pump water heaters performance in South Africa: Systems monitoring and modelling. Doctoral thesis, University of Sunderland.

Tornari, Vivi (2013) Holographic Interference: Structural Deformation Detection Applied to Cultural Heritage Objects. Doctoral thesis, University of Sunderland.

Patents

Cambridge EnterpriseLimited, Cambridge (GB) (2023) Treatment of Polymer Particles. US 11,753,508 B2.

Artefact

Rennie, Colin (2017) Concurentes. [Artefact]

Show/Exhibition

Rennie, Colin (2018) Unknown Apparatus at Fabricated. Queens Hall, 15 Mar-14 Apr 2018, Hexham.

Other

Watkinson, Cate (2024) Restoration and repair of stained glass artworks in Monkseaton Metro station. Nexus, UK.