Close menu

SURE

Sunderland Repository records the research produced by the University of Sunderland including practice-based research and theses.

Up a level
Export as [feed] RSS
Group by: Creators | Item Type
Number of items at this level: 125.

Article

Abubakar, Ismail, Mehrabi, Hamid and Morton, Reg (2020) Classifying Turbomachinery Blade Mode Shapes Using Artificial Neural Networks. International Journal of Mechanical and Mechatronics Engineering, 14 (8). pp. 300-303.

Ali Marttila, Maaren, Marttonen Arola, Salla and Baglee, David (2018) Supporting the selection of value-driven performance measures in maintenance services - comprehensive value assessment. International Journal of Strategic Engineering Asset Management, 3 (2). p. 71. ISSN 1759-9733

Ali-Marttila, Maaren, Tynninen, Leena, Marttonen-Arola, Salla and Kärri, Timo (2015) Value elements of industrial maintenance: verifying the views of the customer and the service provider. International Journal of Strategic Engineering Asset Management, 2 (2). pp. 136-158. ISSN 1759-9733

Barakat, Basel, Keates, Simeon, Wassell, Ian and Arshad, Kamran (2019) Is the Zero-Wait Policy Always Optimum for Information Freshness (Peak Age) or Throughput? IEEE Communications Letters, 23 (6). pp. 987-990. ISSN 1089-7798

Barakat, Basel, Keates, Simeon, Wassell, Ian J. and Arshad, Kamran (2019) Modelling IoT devices communication employing representative operation modes to reveal traffic generation characteristics. International Journal of Parallel, Emergent and Distributed Systems, 36 (2). pp. 117-129. ISSN 1744-5760

Barakat, Basel, Taha, Ahmad, Samson, Ryan, Steponenaite, Aiste, Ansari, Shuja, Langdon, Patrick M., Wassell, Ian J., Abbasi, Qammer H., Imran, Muhammad Ali and Keates, Simeon (2021) 6G Opportunities Arising from Internet of Things Use Cases: A Review Paper. Future Internet, 13 (6). p. 159. ISSN 1999-5903

Bendiek, Paula, Taha, Ahmad, Abbasi, Qammer H. and Barakat, Basel (2021) Solar Irradiance Forecasting Using a Data-Driven Algorithm and Contextual Optimisation. Applied Sciences, 12 (1). p. 134. ISSN 2076-3417

Bianchi, Vezio, Carey, Tian, Viti, Leonardo, Li, Lianhe, Linfield, Edmund H., Davies, A. Giles, Tredicucci, Alessandro, Yoon, Duhee, Karagiannidis, Panagiotis, Lombardi, Lucia, Tomarchio, Flavia, Ferrari, Andrea C., Torrisi, Felice and Vitiello, Miriam S. (2017) Terahertz saturable absorbers from liquid phase exfoliation of graphite. Nature Communications, 8. p. 15763. ISSN 2041-1723

Burn, Kevin and Cox, Chris (2018) A hands-on approach to teaching system identification using first order plus dead time (FOPDT) modelling of step response data. International Journal of Electrical Engineering and Education. ISSN 0020-7209

Campos, Jaime, Sharma, Pankaj, Jantunen, Erkki, Baglee, David and Fumagalli, Luca (2017) Business Performance Measurements in Asset Management with the Support of Big Data Technologies. Management Systems in Production Engineering, 25 (3). pp. 143-149. ISSN 2450-5781

Cossey, Dwane E, Hodge, Stephen A and Karagiannidis, Panagiotis (2023) New nanocomposites based on poly(benzoxazine-co-epoxy) matrix reinforced by novel graphene single and mixed blend fillers. Journal of Reinforced Plastics and Composites. pp. 1-23. ISSN 1530-7964

Cox, Chris, Tindle, John and Burn, Kevin (2016) A comparison of software-based approaches to identifying FOPDT and SOPDT model parameters from process step response data. Applied Mathematical Modelling, 1 (1). pp. 100-114. ISSN 0307-904X

Elkady, M, Elmarakbi, Ahmed and MacIntyre, John (2015) Integration of Vehicle Dynamics Control Systems with an Extendable Bumper for Collision Mitigation. International Journal of Automotive and Mechanical Engineering, 12. pp. 2893-2913. ISSN 2229-8649

Elkady, M., Elmarakbi, Ahmed, MacIntyre, John and Alhariri, M. (2016) Multi-body Integrated Vehicle-Occupant Models for Collision Mitigation and Vehicle Safety using Dynamics Control Systems. International Journal of System Dynamics Applications, 5 (2). pp. 81-125. ISSN 2160-9772

Elmarakbi, Ahmed, El-Safty, Sherif, Martorana, B and Azoti, Wiyao (2017) Nanocomposites for Automotive: Enhanced Graphene-based Polyer Materials and Multi-Scale Approach. International Journal of Automotive Composites, 2 (2). pp. 155-166. ISSN 2051-8218

Elmarakbi, Ahmed, Jianhua, Wang and Azoti, Wiyao (2016) Nonlinear Elastic Moduli of Graphene Sheet-Reinforced Polymer Composites for Automotive Applications. International Journal of Solids and Structures, 81 (1). pp. 383-392. ISSN 0020-7683

Farooq, Sheikh Aamir, Mukhtar, Sheikh Haris, Raina, Ankush, Ul Haq, Mir Irfan, Md Irfanul, Haque Siddiqui4, Naveed, Nida and Dan, Dobrota (2024) Effect of TiB2 on the Mechanical and Tribological Properties of Marine Grade Aluminum Alloy 5052: An Experimental Investigation. Journal of Materials Research and Technology, 29. pp. 3749-3758. ISSN 2214-0697

Farooq, Umer, Baig, Imran, Bhatti, Muhammad Khurram, Mehrez, Habib, Kumar, Arun and Gupta, Manoj (2022) Prototyping using multi-FPGA platform: A novel and complete flow. Microprocessors and Microsystems, 96. p. 104751. ISSN 0141-9331

Farooq, Umer and Mehrez, Habib (2021) Pre-silicon verification using multi-FPGA platforms: A review. Journal of Electronic Testing, 37 (1). pp. 7-24. ISSN 0923-8174

Foster, Monika, Mulroy, Tim and Carver, Mark (2020) Exploring coping strategies of transfer students joining universities from colleges. Student Success Journal, 11 (1). pp. 72-81. ISSN 2205-0795

Habchi, Charbel, Lemenand, Thierry, Della Valle, Dominique, Khaled, Mahmoud, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Mixing assessment by chemical probe. Journal of Industrial and Engineering Chemistry, 20 (4). pp. 1411-1420. ISSN 1226-086X

Haishang, Wu, Mehrabi, Hamid, Naveed, Nida and Karagiannidis, Panagiotis (2022) A Business Model for Additive Manufacturing of Recycled Plastics towards Sustainability. The International Journal of Advanced Manufacturing Technology. ISSN 1433-3015

Hassani, Vahid, Morris, Adrian, Zunaidi, Ibrahim, Hamid, Mehrabi, Roger, O'Brien and Ismail, Abubakar (2019) A Mathematical Model for A Cladding Fastener to Estimate the Maximum Pull-Out Force Capacity. Journal of Physics: conference series 1529, 1529. pp. 1-8.

Hassen, D., Shenashen, M.A., El-Safty, Sherif, Selim, M.M., Isago, H., Elmarakbi, Ahmed, El-Safty, A. and Yamaguchi, H. (2016) Nitrogen-doped carbon-embedded TiO 2 nanofibers as promising oxygen reduction reaction electrocatalysts. Journal of Power Sources, 330. pp. 292-303. ISSN 0378-7753

Hassen, Diab, El-Safty, Sherif, Tsuchiya, Koichi, Chatterjee, Abhijit, Elmarakbi, Ahmed, Shenashen, Mohamed. A. and Sakai, Masaru (2016) Longitudinal Hierarchy Co3O4 Mesocrystals with High-dense Exposure Facets and Anisotropic Interfaces for Direct-Ethanol Fuel Cells. Scientific Reports, 6 (1). ISSN 2045-2322

Humphries, Lynne (2016) Let's play together: The design and evaluation of a collaborative, pro-social game for preschool children. International Journal of Continuing Engineering Education and Life-Long Learning (IJCEELL), 26 (2). ISSN 1560-4624

KINKIRI, Saritha, BAKARAT, Basel and KEATES, Simeon (2020) Identification of a Speaker from Characteristics of a Voice. Sensors & Transducers, 244 (5). pp. 7-12. ISSN 2306-8515

Kahwash, F., Barakat, Basel and Maheri, A. (2023) Coupled thermo-electrical dispatch strategy with AI forecasting for optimal sizing of grid-connected hybrid renewable energy systems. Energy Conversion and Management, 293. p. 117460. ISSN 0196-8904

Kahwash, Fadi, Barakat, Basel, Taha, Ahmad, Abbasi, Qammer H. and Imran, Muhammad Ali (2021) Optimising Electrical Power Supply Sustainability Using a Grid-Connected Hybrid Renewable Energy System—An NHS Hospital Case Study. Energies, 14 (21). p. 7084. ISSN 1996-1073

Karagiannidis, Panagiotis, Georgiou, D., Pitsalidis, C., Laskarakis, A. and Logothetidis, S. (2011) Evolution of vertical phase separation in P3HT:PCBM thin films induced by thermal annealing. Materials Chemistry and Physics, 129 (3). pp. 1207-1213. ISSN 0254 0584

Karagiannidis, Panagiotis, Kalfagiannis, Nikolaos, Georgiou, Despoina, Laskarakis, Argiris, Hastas, Nikolaos A., Pitsalidis, Charalampos and Logothetidis, Stergios (2012) Effects of buffer layer properties and annealing process on bulk heterojunction morphology and organic solar cell performance. Journal of Materials Chemistry, 22 (29). pp. 14624-14632. ISSN 0959-9428

Karagiannidis, Panagiotis, Kassavetis, S., Pitsalidis, C. and Logothetidis, S. (2011) Thermal annealing effect on the nanomechanical properties and structure of P3HT:PCBM thin films. Thin Solid Films, 519 (12). pp. 4105-4109. ISSN 00406090

Karagiannidis, Panagiotis, Stergiou, Anagnostis C. and Karayannidis, George P. (2008) Study of crystallinity and thermomechanical analysis of annealed poly(ethylene terephthalate) films. European Polymer Journal, 44 (5). pp. 1475-1486. ISSN 00143057

Khaled, M., Gad ElRab, M., Habchi, C., Al Shaer, A., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2015) Analysis and Modeling of the Thermal Soak Phase of a Vehicle – Temperature and Heat Flux Measurements. International Journal of Automotive Technology, 16 (2). pp. 221-229. ISSN 1470-9511

Khaled, M., Hachem, F., El Hage, H., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2016) Experimental Study of the Flow Induced by a Vehicle Fan and the Effect of Engine Blockage in a Simplified Model. International Journal of Automotive Technology, 17 (4). pp. 617-627. ISSN 1229-9138

Khaled, Mahmoud, Al-Shaer, A., Ramadan, Mohamad, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Sensitivity and applications of a new method for the simultaneous measurement of convective and radiative heat flux in underhood applications—toward multiple versions. Measurement Science and Technology, 25 (3). pp. 1-12. ISSN 0957-0233

Khaled, Mahmoud, Habchi, Charbel, Harambat, Fabien, Elmarakbi, Ahmed and Peerhossaini, Hassan (2014) Leakage effects in car underhood aerothermal management: temperature and heat flux analysis. Heat and Mass Transfer, 50 (10). pp. 1455-1464. ISSN 0947-7411

Khaled, Mahmoud, Ramadan, Mohamad, El-Hage, Hicham, Elmarakbi, Ahmed, Harambat, Fabien and Peerhossaini, Hassan (2014) Review of underhood aerothermal management: Towards vehicle simplified models. Applied Thermal Engineering, 73 (1). pp. 842-858. ISSN 1359-4311

Knapton, David (2019) Opinion piece: ensuring an effective higher engineering provision for STEM engaged applicants. Higher Education Pedagogies, 4 (1). ISSN 2375-2696

Marrakchi, Zied, Mrabet, Hayder, Farooq, Umer and Mehrez, Habib (2009) FPGA interconnect topologies exploration. International Journal of Reconfigurable Computing, 2009. ISSN 1687-7195

Marttonen-Arola, Salla, Monto, Sari and Kärri, Timo (2013) Profitable working capital management in industrial maintenance companies. Journal of Quality in Maintenance Engineering, 19 (4). pp. 429-446.

Marttonen-Arola, Salla, Viskari, Sari and Kärri, Timo (2013) Appeasing company owners through effective working capital management. International Journal of Managerial and Financial Accounting, 5 (1). pp. 64-78. ISSN 1753-6715

Marttonen-Arola, Salla, Viskari, Sari and Kärri, Timo (2013) The missing link between maintenance contracts and flexible asset management. International Journal of Procurement Management, 6 (6). pp. 649-665.

Metso, Lasse, Marttonen, Salla, Thenent, Nils E. and Newnes, Linda B. (2016) Adapting the SHEL model in investigating industrial maintenance. Journal of Quality in Maintenance Engineering, 22 (1). pp. 62-80.

Mollon, V., Bonhomme, Jorge, Elmarakbi, Ahmed, Vina, J. and Arguelles, A. (2015) Comparison of numerical, empirical and local partition methods in ADCB specimens. International Journal of Automotive Composites, 1 (4). pp. 299-312. ISSN 2051-8218

Naveed, Nida (2018) Experimental Study of the Effects of Wire EDM on the Characteristics of Ferritic Steel, At a Micro-Scale on the Contour Cut Surface. Metallurgical Research & Technology, 115 (4). pp. 1-11. ISSN 2271-3646

Naveed, Nida (2020) Guidelines to select suitable parameters for contour method stress measurements. Archives of Mechanics, 72 (1). pp. 39-58. ISSN 0373-2029

Salonitis, Konstantinos, Jolly, Mark R., Zeng, Binxu and Ahmad Mehrabi, Hamid (2016) Improvements in energy consumption and environmental impact by novel single shot melting process for casting. Journal of Cleaner Production, 137. pp. 1532-1542. ISSN 0959-6526

Sasikumar, A, Gopi, S and Mohan, Dhanesh G (2019) Effect of magnesium and chromium fillers on the microstructure and tensile strength of friction stir welded dissimilar aluminium alloys. Materials Research Express, 6 (8). p. 86580. ISSN 2053-1591

Shah, Raj and Barkas, Linda Anne (2018) Analysing the impact of e-learning technology on students’ engagement, attendance and performance. Research in Learning Technology, 26 (2070). ISSN 2156-7069

Shenashen, Mohamed A., Hassen, Diab, El-Safty, Sherif, Selim, Mahmoud M., Akhtar, Naeem, Chatterjee, Abhijit and Elmarakbi, Ahmed (2016) Mesoscopic Fabric Sheet Racks and Blocks as Catalysts with Efficiently Exposed Surfaces for Methanol and Ethanol Electrooxidation. Advanced Materials Interfaces, 3 (24). p. 1600743. ISSN 2196-7350

Sinkkonen, Tiina, Kivimäki, Harri, Marttonen-Arola, Salla, Galar, Diego, Villarejo, Roberto and Kärri, Timo (2016) Using the life-cycle model with value thinking for managing an industrial maintenance network. International Journal of Industrial and Systems Engineering, 23 (1). pp. 19-35.

Taha, Ahmad, Barakat, Basel, Taha, Mohammad M. A., Shawky, Mahmoud A., Lai, Chun Sing, Hussain, Sajjad, Abideen, Muhammad Zainul and Abbasi, Qammer H. (2023) A Comparative Study of Single and Multi-Stage Forecasting Algorithms for the Prediction of Electricity Consumption Using a UK-National Health Service (NHS) Hospital Dataset. Future Internet, 15 (4). p. 134. ISSN 1999-5903

Taha, Ahmad, Taha, Mohammad M.A. and Barakat, Basel (2021) AI-Based Fall Detection Using Contactless Sensing. 2021 IEEE Sensors. ISSN 2168-9229

Ylä-Kujala, Antti, Marttonen, Salla, Kärri, Timo, Sinkkonen, Tiina and Baglee, David (2016) Inter-organisational asset management: linking an operational and a strategic view. International Journal of Process Management and Benchmarking, 6 (3). pp. 366-385. ISSN 1460-6739

Book Section

Barakat, Basel, Keates, Simeon, Wassell, Ian and Arshad, Kamran (2019) Adaptive Status Arrivals Policy (ASAP) Delivering Fresh Information (Minimise Peak Age) in Real World Scenarios. In: Universal Access in Human-Computer Interaction. Multimodality and Assistive Environments. Springer, pp. 419-430. ISBN 9783030235628

Barakat, Basel, Steponenaite, Aiste, Lall, Gurprit S., Arshad, Kamran, Wassell, Ian J. and Keates, Simeon (2020) Assistive Technology for the Visually Impaired: Optimizing Frame Rate (Freshness) to Improve the Performance of Real-Time Objects Detection Application. In: Universal Access in Human-Computer Interaction. Applications and Practice. Springer, pp. 479-492. ISBN 9783030491079

Farooq, Umer, Marrakchi, Zied and Mehrez, Habib (2011) A new datapath-oriented tree-based FPGA architecture. In: MICROELECTRONICS. INTERNATIONAL CONFERENCE. 2010. (ICM 2010). IEEE Xplore, pp. 403-406. ISBN 9781612841496

Farooq, Umer, Parvez, Husain, Amouri, Emna, Mehrez, Habib and Marrakchi, Zied (2011) Exploring the effect of lut and arity size on a tree-based application specific inflexible fpga. In: 2011 6th International Conference on Design & Technology of Integrated Systems in Nanoscale Era (DTIS 2011). IEEE Xplore, pp. 1-6. ISBN 9781612848990

Farooq, Umer, Parvez, Husain, Marrakchi, Zied and Mehrez, Habib (2011) Comparison between heterogeneous mesh-based and tree-based application specific FPGA. In: Reconfigurable Computing: Architectures, Tools and Applications. ARC 2011. Lecture Notes in Computer Science, 6578 . Springer, Berlin, Heidelberg, pp. 218-229. ISBN 978-3-642-19474-0

Farooq, Umer, Parvez, Husain, Marrakchi, Zied and Mehrez, Habib (2009) A new tree-based coarse-grained FPGA architecture. In: 2009 Ph.D. Research in Microelectronics and Electronics. IEEE Xplore, pp. 48-51. ISBN 9781424437337

Gupta, Vivudh, Singh, Pawandeep and Naveed, Nida (2023) Epoxy based Nanocomposites: Tribological Characteristics and Challenges. In: Nanomaterials for Sustainable Tribology. CRC Press - Taylor Francis, pp. 1-11. ISBN 9781003306276

Hayes, Catherine and Corrie, Ian (2022) Interdisciplinary Doctoral Education and Strategic Management in Crises: Harnessing Agency with Praxis. In: International Transformative Learning Conference Platform - Round Table. UNSPECIFIED, Michigan, USA.

Humphries, Lynne (2015) Evaluating the Use of a Prosocial Digital Game to Identify and Compare Preschool Children's Social and Emotional Skills. In: Emotions, Technology and Digital Games. Elsevier. ISBN 978-0-12-801738-8

Johnson, A.P., Halliday, D.M., Millard, A.G., Tyrrell, A.M., Timmis, Jonathan, Liu, J., Harkin, J., McDaid, L. and Karim, S. (2017) An FPGA-based hardware-efficient fault-tolerant astrocyte-neuron network. In: 2016 IEEE Symposium Series on Computational Intelligence (SSCI). UNSPECIFIED. ISBN 9781509042401

Kinkiri, Saritha, Barakat, Basel and Keates, Simeon (2020) Phonemes: An Explanatory Study Applied to Identify a Speaker. In: Machine Learning, Image Processing, Network Security and Data Sciences. Springer, pp. 58-68. ISBN 9789811563171

Knowles, Michael and Baglee, David (2015) Ultra Low Carbon Vehicle Management Based on Telematic Monitoring. In: Through-Life Engineering Services. Decision Engineering . Springer International Publishing, pp. 83-94. ISBN 978-3-319-12110-9

Wheeler, Shirley, Millington, Andrew and Burton, Robert (2004) L'attitude. In: L' attitude. Art Editions North, University of Sunderland, pp. 10-11. ISBN 1 873757 79 4

Conference or Workshop Item

Ahmed, D., El-Safty, Sherif, Khalil, K., Dewidar, M., Abdelsalam, M. and Elmarakbi, Ahmed (2015) Nitrogen-Doped Titanium/Carbon Nanofibers Mats as Promising Oxygen Reduction Reaction Electrocatalysts in Acidic Media. In: Nanomaterials: Application & Properties 2015, 16-23 Sep 2015, Lviv, Ukraine. (Unpublished)

Aramide, Samuel O., Barakat, Basel, Wang, Yi, Keates, Simeon and Arshad, Kamran (2019) Generalized proportional fair (GPF) scheduler for LTE-A. In: 2017 9th Computer Science and Electronic Engineering (CEEC).

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Constitutive Modelling of Graphene Platelets Reinforced Polymer Composite Materials with Imperfect Interfaces. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA. (Unpublished)

Azoti, Wiyao and Elmarakbi, Ahmed (2016) Multi scale modelling of graphene platelets reinforced polymer matrix composite materials. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal. (Unpublished)

Azoti, Wiyao, Elmarakbi, Ahmed, El-Hage, H. and Elkady, M. (2016) Hierarchical modelling of carbon fibers graphene reinforced polymer composites materials. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal. (Unpublished)

Baglee, David and Marttonen-Arola, Salla (2018) An approach to identifying waste in data management processes. In: 14th International Conference on Data Science (ICDATA 2018), 30 July - 2 August, Las Vegas, Nevada, USA.

Barakat, Basel and Arshad, Kamran (2015) Energy efficient carrier aggregation for LTE-Advanced. In: 2015 IEEE 8th GCC Conference Exhibition.

Barakat, Basel and Arshad, Kamran (2015) Energy efficient scheduling in LTE-advanced for Machine Type Communication. In: 2015 International Conference and Workshop on Computing and Communication (IEMCON).

Barakat, Basel and Arshad, Kamran (2015) An adaptive hybrid scheduling algorithm for LTE-Advanced. In: 2015 22nd International Conference on Telecommunications (ICT).

Barakat, Basel, Hall, Lynne and Keates, Simeon (2022) Integrating Machine Learning with Augmented Reality for Accessible Assistive Technologies. In: Universal Access in Human-Computer Interaction. User and Context Diversity.

Barakat, Basel, Keates, Simeon, Arshad, Kamran and Wassell, Ian J (2019) Deriving machine to machine (M2M) traffic model from communication model. In: 2018 Fifth International Symposium on Innovation in Information and Communication Technology (ISIICT).

Barakat, Basel, Steponenaite, Aiste, Lall, Gurprit S., Arshad, Kamran, Wassell, Ian J. and Keates, Simeon (2020) Assistive Technology for the Visually Impaired: Optimizing Frame Rate (Freshness) to Improve the Performance of Real-Time Objects Detection Application. In: International Conference on Human-Computer Interaction, 19-24 Jul 2020, Copenhagen, Denmark.

Barakat, Basel, Yassine, Hachem, Keates, Simeon, Wassell, Ian and Arshad, Kamran (2019) How to Measure the Average and Peak Age of Information in Real Networks? In: European Wireless 2019; 25th European Wireless Conference.

Dixon, Derek, Robson, Kenneth, Baglee, David and Wheatley, Alan (2017) The Role of Cultural Development When Improving Maintenance Practice in the Automotive Supply Chain. In: COMADEM 2017, 10th July - 13th July 2017, Preston, United Kingdom.

Elkady, M. and Elmarakbi, Ahmed (2014) Enhancement Of Occupant Safety During Frontal Collisions using New Vehicle/Occupant Interaction Modelling with VDC Systems and Smart Structures. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 14 - 20 Nov 2014, Montreal, Canada.

Elkady, M. and Elmarakbi, Ahmed (2016) Using an Extendable Bumper With an Aid of Vehicle Dynamics Control System to Improve the Occupant Safety in Frontal Vehicle-to-Vehicle Collision Scenario. In: ASME International Mechanical Engineering Congress and Exposition; Crashworthiness in Transportation Systems, 11-17 Nov 2016, Phoenix, Arizona, USA.

Elkady, M., Elmarakbi, Ahmed and MacIntyre, John (2014) Improvement of Vehicle Safety by using Vehicle Dynamics Control Systems Alongside an Extendable Bumper: A New Mathematical Methodology. In: FISITA 2014 World Congress, 2-6 Jun 2015, Masstricht, The Netherlands.

Elkady, M., Elmarakbi, Ahmed and MacIntyre, John (2016) Integrated Active and Semi-Active Suspension Control System Vehicle Collision Alleviation. In: FISITA 2016 World Automotive Congress, 26-30 Sep 2016, Busan, South Korea. (Unpublished)

Elmarakbi, Ahmed (2015) Enhanced Graphene Nanocomposites Materials for vehicle structures. In: National Institute for Material Sciences (NIMS), 15-17 Feb 2017, Tokyo Big Sight, Japan. (Unpublished)

Elmarakbi, Ahmed (2015) Hierarchical Graphene Composites for Automotive. In: 2nd Graphene World Summit 2015, 4-6 Nov 2015, Barcelona, Spain. (Unpublished)

Elmarakbi, Ahmed (2016) Innovative Graphene-based Polymer Composites for Automotive Applications. In: Annual Automotive Interior Design Summit, 14 Mar 2016, Stuttgart, Germany. (Unpublished)

Elmarakbi, Ahmed (2015) Material Concepts and Challenges for Vehicle Lightweighting: Modelling of Graphene-based Polymer Composites. In: 2nd Mechanics of Composites (MECHCOMP2016), 11-14 Jul 2016, Porto, Portugal. (Unpublished)

Elmarakbi, Ahmed and Basso, M. (2016) Multiscale Analysis of the Mechanical Performance improvements of composites CFRP laminates, and composites with short glass fibers, through the addition of Nanoplatelets of Graphene. In: 1st International Conference on Automotive Composites, 21-23 Sep 2016, Lisbon, Portugal.

Farooq, Umer, Marrakchi, Zied, Mrabet, Hayder and Mehrez, Habib (2008) The effect of LUT and cluster size on a tree based FPGA architecture. In: 2008 International Conference on Reconfigurable Computing and FPGAs, 03-05 Dec 2008, Cancun, Mexico.

Haddad, Karam and Baglee, David (2015) Using Augmented Reality in Manufacturing Firms and its Impacts on Knowledge Transfer. In: 16th European Conference on Knowledge Management - ECKM 2015, 3 - 4 Sep 2015, University of Udine, Italy. (Submitted)

Hayes, Catherine (2020) Defining and Operationalising Research: 'Case Study as Methodology and Method'. In: Graduate Research School (Research Methodologies Series), Wednesday 21st October 2020, Graduate Research School, University of Sunderland. (Unpublished)

Hayes, Catherine (2021) Integration of Dialogic Assessment in a Multi-disciplinary Professional Doctorate; Transformative Learning in Practice. In: Higher Education Advance Assessment Torchbearer, 04 Jul 2021, Higher Education Advance Global Torchbearer Event 2021.

Hayes, Catherine (2021) The PhD/MPhil Viva voce Examination. In: Graduate Research School - PhD Survival Skills, 14 Jun 2021, Graduate Research School, University of Sunderland. (Unpublished)

Hayes, Catherine, Fulton, John and Petrie, Kevin (2019) Beyond Disciplinarity: Insights into the Development of Teaching Ontology, Epistemology and Philosophy on an Interdisciplinary Professional Doctorate Pathway. In: Advance HE’s Annual Teaching and Learning Conference 2019,Teaching in the spotlight: Innovation for teaching excellence, 2nd - 4th July 2019, Northumbria University.

Ihemegbulem, Ibifuro and Baglee, David (2016) Assessing the Effectiveness of ISO 55000 Standard in Small to Medium Sized Enterprises. In: 1st Africa Maintenance & Reliability Conference (AMRC 16), 28-29 Nov 2016, Lagos, Nigeria. (Unpublished)

Khaled, M., Ramadan, M., Elmarakbi, Ahmed, Harambat, F. and Peerhossaini, H. (2014) Underhood Aerothermal Management of Leakage Zones – Temperature Measurements. In: 13th International Conference on Simulation and Experiments in Heat Transfer and its Applications, 2-4 Jul 2014, A Coruña, Spain.

Knowles, Michael and Dixon, Derek (2015) Student Engagement in Final Year Independent Project Work. In: Three Rivers Learning and Teaching Conference: Student Engagement, 27 Mar 2015, St Peter's Campus, University of Sunderland, UK.

Martorana, B., Elmarakbi, Ahmed, Veca, A., Fondacaro, D. and Lambertini, V. (2015) Graphene-based Materials: Opportunities for Multifunctional Lightweight Structures in Automotive Sector. In: NanotechITALY 2015, 25-27 Nov 2015, Bologna, Italy.

Marttonen-Arola, Salla and Baglee, David (2019) Adoption of information-based innovations in industrial maintenance. In: The XXX ISPIM Innovation Conference, 16-19 June 2019, Florence, Italy.

Marttonen-Arola, Salla and Baglee, David (2019) Implementing a CMMS: an investment appraisal based on value of data. In: World Congress on Resilience, Reliability and Asset Management, 28-31 July, Singapore.

Mehrabi, Hamid, Salonitis, Konstantinos and Jolly, Mark (2016) Sustainable Investment Casting. In: 14th WORLD CONFERENCE IN INVESTMENT CASTING, 17-20 April 2016, Paris, France.

Naveed, Nida (2023) Effect of Continuous Carbon Fiber Reinforcement on the Tensile Properties of Onyx Components Printed by Fused Deposition Modelling (FDM) Technology. In: 15th International Conference on Materials Processing and Characterization, 05 - 08 Sep 2023, Northumbria University, UK.

Naveed, Nida (2023) Optimising Fused Deposition Modelling (FDM) Parameters for Enhanced Mechanical Properties of 3D Printed Parts. In: The 8th European Congress on 3D Printing and Additive Manufacturing, 02-03 Oct 2023, Amsterdam, Netherlands.

Naveed, Nida (2023) A Study on the Effect of Concentric Fiber Layers on the Mechanical Properties of Onyx Reinforced with Continuous Fiberglass. In: The BSSM’s 17th International Conference on Advances in Experimental Mechanics, 28-30 Aug 2023, University of Glasgow, Glasgow, Scotland.

O'Brien, Roger, Veldsman, W and Elmarakbi, Ahmed (2015) The development of a robotic Low Stress No Distortion (LSND) welding system suitable for achieving real world applications with practical examples. In: 18th International Conference on Joining Materials, 26-29 Apr 2015, Helsingor, Denmark.

O'Brien, Roger, Veldsman, W. and Elmarakbi, Ahmed (2014) The Development of an Industrial Robotic Low Stress No Distortion (LSND) Welding System. In: International Institute of Welding – International Congress (IIW-IC-2014), 9-11 Apr 2014, New Delhi, India.

O'Hara, Suzy (2019) Little Inventors - Thinking Like a Child - Professional Development Workshop. In: Little Inventors - Thinking Like a Child, 15 November 2019, Gala Theatre, Durham.

Pangracious, Vinod, Mehrez, Habib, Beltaief, Nizar, Marrakchi, Zied and Farooq, Umer (2014) Exploration environment for 3D heterogeneous tree-based FPGA architectures (3D HT-FPGA). In: 2013 International Conference on Reconfigurable Computing and FPGAs (ReConFig), 09-11 Dec 2013, Cancun, Mexico.

Parvez, Husain, Marrakchi, Zied, Farooq, Umer and Mehrez, Habib (2009) A new coarse-grained FPGA architecture exploration environment. In: 2008 International Conference on Field-Programmable Technology, 08-10 Dec 2008, Taipei, Taiwan.

Ridley, Ian (2016) The role of project management during the concept design phase with particular reference to marine projects. In: Maritime Project Management, RINA, 24 Feb 2016, London, UK.

Salla, Marttonen-Arola and David, Baglee (2018) Identifying current challenges of data-based maintenance management: a case study. In: 31st International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2018), 2-5 July, 2018, Sun City, South Africa.

Serry, M., Abdel-Nasser, S., Sakr, M. and Elmarakbi, Ahmed (2016) Nanostructured Conducting Polymer-Graphene Composite for Energy Conversion Applications. In: 2nd International Conference on Advanced Functional Materials (AFM2016), 8-11 Aug 2016, Jeju, South Korea. (Unpublished)

Shaalan, Abdu, Baglee, David and Dixon, Derek (2022) Development of maintenance framework for modern manufacturing systems. In: BINDT conference, 07-09 June 2022, London.

Sharsheer, Mohammad, Barakat, Basel and Arshad, Kamran (2016) Coverage and capacity Self-Optimisation in LTE-Advanced using Active Antenna Systems. In: 2016 IEEE Wireless Communications and Networking Conference Workshops (WCNCW).

Sheikh, M, Baglee, David, Knowles, Michael, Elmarakbi, Ahmed and Al-Hariri, Mohammad (2015) A Novel Approach for Predicting Thermal Runaway in Electric Vehicle Batteries when Involved in a Collision. In: ASME 2015 International Mechanical Engineering Congress and Exposition, 13-19 Nov 2015, Houston, Texas, USA.

Sheikh, Muhammad, Elmarakbi, Ahmed, David, B. and Michael, M. (2016) Heat Generation Estimation in Electric Vehicle Battery under Mechanical Load Condition. In: FISITA 2016 World Automotive Congress, 26-30 Sep 2016, Busan, South Korea. (Unpublished)

shaalan, Abdu, Baglee, David and Morris, Adrian (2022) The development of CMMS incorporating condition monitoring tools in the advances of Industry 4. In: BINDT conference, 07-09 June 2022, London.

Book

Tyrrell, John and Gaff, Jackie (1999) 70s & 80s The High-Tech Age of Design. 20th Century Design, 5 (6). Heinemann Library, David West Children's Books London. ISBN 978-0836827095

Thesis

Craig, Ian (2018) SEAWATER INTAKE RISERS FOR FLOATING LIQUEFIED NATURAL GAS (FLNG) VESSELS. Doctoral thesis, University of Sunderland.

Farooq, Umer (2011) Exploration et optimisation des architectures de circuits FPGA hétérogènes à base de structures arborescentes et dédiées aux applications spécifiques. Doctoral thesis, Paris 6.

Patents

Cambridge Enterprise Limited (2021) Layered materials and methods for their processing. US10906814B2.

Show/Exhibition

Collier, Mike (2015) drawing? .

This list was generated on Sat Apr 13 22:51:16 2024 BST.